Product Description
Chain Link Swivel Swing Gate Wheel — Bolt-On, Weld-Optional, Galvanized (Fits 1-5/8″ & 2″ Gate Frames)
- Swiveling Assist for Swing Gates — Wheel pivots as the gate turns, reducing hinge stress and helping prevent sag
- Professional / Contractor Grade — Heavy-gauge, pressed-steel assembly with a 6″ solid rubber wheel chosen by fence professionals
- Fast Bolt-On Install — Clamps to 1-5/8″ or 2″ gate uprights; mounting hardware included
- Weld-Optional — After clamping and alignment, you can tack-weld the bracket for a permanent connection
- Glides on Flat Aprons — Best on concrete, asphalt, or well-compacted surfaces
Give heavier or wider swing gates a smooth, professional-grade assist with this swivel swing gate wheel. The bolt-on bracket secures to your 1-5/8″ or 2″ O.D. gate upright, while the 6″ solid wheel carries load at the leading edge and pivots to track naturally through turns. For straight approaches on very flat aprons, see our fixed swing gate wheel; for uneven or soft ground, consider the Rut Runner pneumatic double-wheel carrier.
Why Choose This
- Chosen by professionals — Contractor-grade build for dependable field performance
- Reduces hinge load — Shares weight so gates stay square and easier to operate
- Install-friendly — Clamp on in minutes; weld later if desired
- Tracks through turns — Swiveling head follows curved or angled approaches
Specifications
| Gate Frame Size (O.D.) | 1-5/8″ | 2″ (1-7/8″ O.D.) |
| Wheel Diameter | 6″ (5-7/8″ actual) | 6″ (5-7/8″ actual) |
| Material | Pressed galvanized steel bracket; solid rubber wheel | |
| Finish | Galvanized (silver) | |
| Included Hardware | Mounting bolt & nuts (bolt-on clamp assembly) | |
| Approx. Weight (each) | 5 lb | 5.5 lb |
| Typical Usage | Residential & commercial swing chain link gates on flat/level aprons | |
Installation
With the gate closed, position the assembly under the leading edge of the bottom rail. Clamp the bolt-on bracket to the gate upright (1-5/8″ or 2″ O.D.), square the wheel so it tracks straight when closed, and tighten the hardware. Open/close the gate to confirm clearance and swivel action. For heavy-duty or high-traffic sites, add tack welds after clamping for a permanent connection.
Buying Guide
- Surface conditions: Use the fixed wheel on straight, flat approaches; step up to the swivel when the approach is angled or curved; choose pneumatic for uneven or soft ground.
- Gate frame size: Order to match your gate upright O.D. — 1-5/8″ or 2″.
- Complementary hardware: Pair with a drop rod kit on double drives and a reliable self-latching butterfly latch for secure closure.
- Not for rolling/cantilever gates: For track-style rolling gates, use rear track wheels and track brackets; cantilevers require truck/carriage assemblies.
Frequently Asked Questions
- Does the wheel swivel?
- Yes—this model includes a swiveling head so the wheel can pivot as the gate turns.
- What frame sizes does it fit?
- Two options: 1-5/8″ O.D. and 2″ (1-7/8″ O.D.) gate uprights.
- What’s the wheel size?
- 6″ nominal diameter (about 5-7/8″ actual).
- Is mounting hardware included?
- Yes—the bolt-on clamp assembly includes the necessary bolt & nuts.
- Can I weld it?
- Yes—after you clamp and align the assembly, tack-weld it to the frame if you want a permanent connection.
Comparison
| Option | Strengths | Considerations | Best For |
|---|---|---|---|
| Swivel Swing Gate Wheel (this item) | Tracks through turns; contractor-grade; bolt-on, weld-optional | Works best on flat/level aprons | Walk/drive swing gates with angled or curved approaches |
| Fixed Swing Gate Wheel | Simple & rugged; straight tracking | Not ideal for angled approaches | Straight, flat aprons where steering isn’t needed |
| Pneumatic Double-Wheel Carrier | Handles uneven/soft ground; higher flotation | Larger assembly; higher cost | Gravel, rutted, or job-site surfaces |
Not sure which wheel style fits your apron and gate weight? Contact us and we’ll help you choose a fence-contractor-grade setup that rolls smoothly and lasts.
