- Connect 2 Pieces of 1-3/8" or 1-5/8" Chain Link Top Rail
- Galvanized Pressed Steel Coated with PVC Vinyl for Color
- Long Lasting Rust Protection
- Scratch Resistant
- Available in Black, Brown, or Green to Match Common Chain Link Fabric & Post Colors
- Can Be Used with a Sleeve Expansion Spring to Keep Top Rail Tight Across the Fence
Heavy-Mil Vinyl Coated Chain Link Top Rail Sleeves are a premium product that are finished with a 10-14 millimeter PVC coating. They offer superior scratch resistance and longer rust protection than powder coated fittings. Vinyl coated fittings are most often used in commercial and industrial chain link fencing projects, but they are also used for residential fencing projects where durability and long lasting color performance is desired.
Chain link top rail sleeves connect two pieces of non-swedged top rail to form a continuous line at the top of your fence. Non-swedged top rail is the same diameter at both ends of the rail, whereas swedged rail has a smaller end that fits into the larger end of the next rail. Sleeves are only required on non-swedged rail, or rails where the swedged end has been cut off. Typically, 1-3/8" sleeves are used on residential fences, while 1-5/8" sleeves are used on commercial and industrial fencing.
There is a minimum order quantity of 10 for each of our heavy-mil vinyl coated fittings. All heavy-mil fittings are coated to order and are not returnable.
|Top Rail Size (O.D)||1-3/8"||1-5/8"|
|Weight||.5 lbs||.65 lbs|
|Material||Pressed Steel||Pressed Steel|
|Finish||Heavy Mil Vinyl Coating - Black, Brown, or Green||Heavy Mil Vinyl Coating - Black, Brown, or Green|
|Typical Usage||Residential Chain Link Fencing||Commercial Chain Link Fencing|
Slide the sleeve onto the end of your first rail, and then fit your second rail into the other end of the sleeve.