Product Description
Galvanized Male Wall Plate Hinge for Chain Link Gates — 5/8″ Pin
- Wall / Flat-Surface Mount — Attach a chain link gate to a wall, brick pillar, or flat wood post when a round post isn’t practical
- Standard 5/8″ Pin — Works with common 5/8″ female strap hinges on chain link gate uprights
- Galvanized Steel — Corrosion-resistant finish for outdoor service
- Compact, Durable Plate — Simple, low-profile hardware suited to residential gates
- Choose Your Anchors — Use appropriate fasteners for wood or masonry (not included)
Use a male wall plate hinge anywhere you need to hang a chain link gate from an existing structure—like a house wall, masonry column, or flat wood post—without setting a pipe post. The plate anchors to the surface, and the 5/8″ pintle serves as the pivot for your female strap hinge, creating a clean, reliable hinge point for residential walk or drive gates.
Why Choose This
- No post required — Great for attaching gates to homes, garages, and masonry columns
- Familiar interface — 5/8″ pin matches widely used chain link female strap hinges
- Installer-friendly — Fast plate mount; pick anchors to suit your substrate
- Weather ready — Galvanized steel resists everyday exposure
Specifications
| Type | Male wall plate hinge (post substitute) |
| Pin Diameter | 5/8″ (fits 5/8″ female strap hinges) |
| Pin Length | 1-1/2″ |
| Material / Finish | Galvanized steel / Silver |
| Included Hardware | None — use anchors/fasteners appropriate to the surface |
| Weight (approx.) | 0.45 lb |
| Typical Usage | Residential chain link gates mounted to walls, brick pillars, or flat wood posts |
Installation
Lay out hinge height and swing direction. For wood, pre-drill and use appropriately sized lag screws. For masonry (brick/block), drill with a masonry bit and use rated anchors (sleeve, wedge, or structural screws) per manufacturer guidance. Anchor the plate, slide the 5/8″ female strap hinge onto the pintle, and hang the gate. Use two plates per gate (top & bottom); tall/heavy gates may require a third.
Buying Guide
- When to choose a wall plate: Use where adding a round post isn’t feasible (attaching to a house wall or masonry column).
- Hinge pairing: This plate provides the male pintle; pair with 5/8″ female strap hinges on the gate frame.
- Fastener selection: Match anchors to substrate and load; observe edge distances and embedment for masonry.
- Alternatives: On round pipe posts, use male strap or malleable U-bolt hinges; on wood posts, use a male lag-screw hinge; for maximum projection adjustability, consider a J-bolt hinge.
Frequently Asked Questions
- What female hinge fits this?
- Any standard 5/8″ female strap hinge that clamps to the gate upright.
- Are fasteners included?
- No. Choose anchors/lag screws appropriate for your mounting surface.
- What surfaces can I mount to?
- Flat wood posts, brick or block masonry, and other flat structural surfaces able to accept rated anchors.
- How many do I need?
- Two per gate leaf (top and bottom). Use three for tall/heavy gates.
- Is it suitable for outdoor use?
- Yes. The hinge is galvanized steel for corrosion resistance.
Comparison
| Option | Strengths | Considerations | Best For |
|---|---|---|---|
| Male Wall Plate Hinge (this item) | Mounts to flat surfaces; no round post needed | Requires appropriate anchors; fixed plate position | Attaching gates to houses, garages, masonry columns |
| Pressed-Steel Male Strap Hinge | Economical; clamps to round pipe posts | Needs round post; limited projection adjust | Standard residential pipe-post installs |
| Malleable Male U-Bolt Hinge | Clamp-on; rugged casting; includes U-bolt | Round posts only; size-specific | Quick installs on pipe posts |
| Male Lag-Screw Hinge (Wood) | Threads into solid wood; clean look | Wood posts only; limited adjustability | Chain link on wood posts |
| Male J-Bolt Hinge | Highly adjustable projection | Requires through-drilling the post | Fine-tuning reveals or mixed posts |
Need help choosing anchors or pairing with the right female hinges? Contact us and we’ll help you dial in the setup.
Product Videos
Custom Field
Product Reviews
2 Reviews Hide Reviews Show Reviews
-
Male Hinge Wall Plate
excellent
-
Male Plate
All your parts worked perfectly and, as a result, I was able to install a gate mounted on a wooden post and latched to a brick wall - by myself! I was so happy to find your website!
