Chain Link End Rail Clamps / Gate Brace Clamps, Galvanized - Multiple Sizes

Product Description

Galvanized Chain Link End Rail Clamps (Gate Brace “T” Clamps) — Multiple Post × Rail Sizes

• Create Strong T-Connections — Join a brace rail to a post for mid-rail, bottom rail, kennel, or gate bracing
• Fast, Single-Bolt Install — Two-piece clamp sandwiches pipe; tighten one carriage bolt to lock in place
• Galvanized Protection — Zinc-coated steel helps resist rust and weather
• Reduce Part Count — A clean alternative to separate brace bands and rail ends
• Professional Grade — Durable pressed-steel construction for dependable, everyday use

End Rail Clamps—also known as gate brace clamps or T-clamps—connect two pieces of round chain link pipe at a right angle. They’re commonly used to add a mid-rail or bottom rail to a fence line, brace larger swing gates, and stiffen kennel panels or sports fencing. Each two-piece clamp wraps the post and rail, then cinches tight with a single carriage bolt for a secure, low-profile connection that stands up to the elements.

Why Choose This

• Versatile — Works for mid-rails, bottom rails, bracing, and panel builds
• Installer-friendly — Simple alignment, minimal tools, quick adjustments
• Consistent look — Compact fitting keeps lines clean vs. bulkier bracket stacks
• Built to last — Galvanized steel for outdoor durability

Specifications

Installation

Position the two clamp halves so they wrap the post and the brace rail in a T-formation. Insert the specified carriage bolt and tighten until the assembly clamps firmly. Verify alignment along the fence line and re-tighten after initial gate/fence cycling.

Buying Guide

• Size by “Post × Rail”: Choose the clamp that matches your post O.D. and your brace rail O.D. (note that “2″” post is 1-7/8″ actual O.D.).
• Bolt size: Clamps for 1-3/8″ rail use 5/16″ × 2″ bolts; clamps for 1-5/8″ or 2″ rail use 3/8″ × 2-1/2″ bolts (see table).
• How many? One clamp per post-to-rail T-connection. Use two clamps when bracing both sides of a gate frame.
• When to choose clamps: Use end rail clamps when you want a compact, one-bolt connection instead of a brace band + rail end cup stack-up.

Frequently Asked Questions

What do end rail clamps do?

They connect a brace rail to a post at a right angle (T-connection) for mid-rails, bottom rails, and gate bracing.

How do I pick the right size?

Match the size to your post O.D. (first number) and rail O.D. (second number). Remember nominal “2″” post is 1-7/8″ actual O.D.

Are carriage bolts included?

No. Bolts are specified in the table and sold separately.

What bolt size do I need?

For clamps that fit 1-3/8″ rail, use 5/16″ × 2″. For clamps that fit 1-5/8″ or 2″ rail, use 3/8″ × 2-1/2″.

Can these replace brace bands + rail ends?

Yes. End rail clamps provide a compact T-connection without separate brace bands and rail end cups.

Comparison

• End Rail Clamp (this item): Two-piece, single-bolt T-connection for post-to-rail.
• Brace Band + Rail End: Traditional two-part solution; slightly bulkier hardware stack with more pieces.
• Line Rail Clamp: Used primarily for rail-to-rail or panel-to-panel connections in kennel/panel builds.