Product Description
Chain Link Swing Gate Wheel — Fixed, U-Bolt Mount, Galvanized (Fits 1-5/8″ & 2″ Gate Frames)
- Supports Heavy Swing Gates — Fixed (non-swiveling) wheel carries the leading edge to reduce hinge stress and prevent sag
- Professional / Contractor Grade — Galvanized steel bracket with solid wheel construction chosen by fence professionals
- Quick U-Bolt Attachment — Adjustable clamp fits 1-5/8″ and 2″ gate uprights; hardware included
- Smooth Travel on Flat Surfaces — Ideal for concrete, asphalt, and well-compacted aprons
- Weld-Optional — Can be tack-welded to the frame after clamping for extra rigidity
Give a sagging or heavy swing gate a reliable assist with this galvanized, fixed swing gate wheel. The included U-bolt clamps to a 1-5/8″ or 2″ gate upright and positions the 6″ wheel under the leading edge so the leaf rolls cleanly as it opens and closes. For uneven ground or soft soils, see our pneumatic Rut Runner Double Wheel Carrier; for tighter turning and angled approaches, consider the Swivel Swing Gate Wheel.
Why Choose This
- Fence-contractor grade — Durable galvanized bracket with solid wheel for long outdoor service
- Less strain on hinges — Carries part of the gate weight to help keep the leaf square
- Installer-friendly — Clamp on in minutes; weld later if desired
- Tuned for flat aprons — Fixed axle tracks straight for smooth, predictable travel
Specifications
| Gate Frame Compatibility | 1-5/8″ or 2″ O.D. uprights (adjustable U-bolt clamp) | |
| Wheel Diameter | 6″ (5-7/8″ actual) | |
| Wheel Width | 1-1/2″ | |
| Material | Galvanized steel bracket; solid wheel | |
| Finish | Galvanized (silver) | |
| Included Hardware | U-bolt & nuts | |
| Approx. Weight | 6 lb | |
| Typical Usage | Swing chain link gates on flat, even surfaces | |
Installation
With the gate closed, position the wheel under the leading edge of the bottom rail and clamp the bracket around the upright using the included U-bolt. Square the wheel so it tracks straight (perpendicular to the fence line when closed), then tighten the nuts. Test travel and adjust height/angle as needed. For heavy-duty sites, add tack welds after clamping for extra security.
Buying Guide
- Ground conditions: This fixed wheel is best on flat concrete/asphalt. For rutted or uneven ground, choose the Rut Runner pneumatic double wheel.
- Turning & alignment: Need the wheel to steer around corners or slopes? Use a swivel swing wheel.
- Not for rolling/cantilever gates: For track-style rolling gates, use rear track wheels and compatible track brackets. For cantilevers, use cantilever trucks/carriages.
- Frame size: Clamp adjusts between 1-5/8″ and 2″ uprights; verify your frame O.D. before ordering.
Frequently Asked Questions
- Does this wheel swivel?
- No—this is a fixed (non-swiveling) swing gate wheel for straight tracking. See our swivel version if you need steering.
- What sizes of gate frames will it fit?
- It clamps to 1-5/8″ and 2″ O.D. frames via the included U-bolt.
- What wheel size is it?
- 6″ nominal diameter (about 5-7/8″ actual) by 1-1/2″ wide.
- Is the hardware included?
- Yes. The U-bolt and nuts are included with the wheel assembly.
- Can I weld it on?
- Yes—after clamping and aligning, you may tack-weld the bracket to the frame for a more permanent connection.
Comparison
| Option | Strengths | Considerations | Best For |
|---|---|---|---|
| Fixed Swing Gate Wheel (this item) | Simple, durable, pro-grade; tracks straight; hardware included | Best on flat, even surfaces | Residential/commercial swing gates with flat aprons |
| Swivel Swing Gate Wheel | Steers around curves/slopes; easier alignment on approach | More moving parts | Gates needing tighter turning radius |
| Rut Runner Pneumatic Double Wheel | Handles uneven or soft ground; higher flotation | Larger assembly; higher cost | Job sites, gravel, or rutted driveways |
Not sure which wheel style fits your apron and gate weight? Contact us and we’ll help you choose a professional-grade setup that rolls smoothly and lasts.
