Product Description
DAC Industries Deluxe Economy Exit Bar Gate Kit with Lock Box for Re-Entry (6040-KIT)
- Deluxe Gate Kit — Surface-mount panic hardware package for free egress and keyed outside entry.
- Economy Exit Bar (#6000) — Press-type, surface-mount device for reliable push-to-exit operation.
- Integrated Lock Box + Key Cylinder — Provides controlled re-entry from the exterior side of the gate.
- 24" Adjustable Mounting Plate — Adapts to gate frames approximately 29"–52" wide; pre-drilled for faster install.
- Adjustable Receiver Bracket — Sized for a 3" O.D. latch post; fine-tunes for smooth, repeatable latching.
- Stainless Tek Screws & Fasteners — Hardware sized for typical chain link and ornamental frames.
The DAC Industries 6040-KIT upgrades a standard exit-only setup by adding a weather-shielded lock box with keyed cylinder for controlled exterior entry. Centered around the proven #6000 surface-mount exit bar, this kit includes a 24" adjustable plate to span common gate frame widths and an adjustable receiver designed for a 3" O.D. latch post. It’s a field-friendly solution for service yards, retail enclosures, and amenity gates that require free egress but also authorized re-entry (verify local code). For higher-abuse locations or an integrated alarm, see the alternatives below.
Specifications
| Kit / SKU | 6040-KIT — Deluxe Economy Exit Bar Gate Kit with Lock Box (re-entry enabled) |
| Exit Device | DAC #6000 surface-mount press-type exit bar |
| Re-Entry Hardware | Integrated lock box with keyed cylinder (includes keys) |
| Mounting Plate | 24" tall plate; adjusts for ~29"–52" gate frame widths; pre-drilled |
| Receiver / Strike | Adjustable receiver bracket for 3" O.D. latch post |
| Included Hardware | Stainless Tek screws and fasteners for typical gate frames |
| Function | Free egress (push-to-exit) with keyed outside entry via lock box |
| Compatibility | Chain link & ornamental metal gate frames; 3" O.D. latch post |
Why Choose This
- Exterior access included — Lock box + cylinder deliver keyed re-entry without piecing parts together.
- Gate-optimized fit — Adjustable plate and receiver speed alignment on chain link or ornamental frames.
- Upgradeable path — For a heavy-duty device or alarmed egress, see 10035-KIT (Advantex) or 6037-KIT (alarm).
Installation (Quick Steps)
- Fit the plate to the gate leaf (≈29"–52" span); clamp, mark, and fasten square to the hinge line.
- Mount the receiver on the 3" O.D. latch post; adjust for clean bolt throw and sure re-latch.
- Install the #6000 bar to the pre-drilled plate; mount the lock box and cylinder on the exterior side.
- Final checks — Cycle egress and exterior keyed entry; tighten fasteners and confirm signage/code details.
Buying Guide
- Budget vs. duty cycle — For higher-traffic or harsher sites, step up to the stainless 10045-KIT (Advantex + lock box).
- Alarmed egress? If you need an audible alert on exit, consider 6047-KIT.
- Exit-only applications — If outside entry isn’t required, the 6030-KIT is the most economical choice.
Frequently Asked Questions
- Does the 6040-KIT allow keyed entry from the outside of the gate?
- Yes. The integrated lock box and keyed cylinder provide controlled exterior access while maintaining free egress.
- What gate widths will the 24-inch mounting plate cover?
- The plate adjusts to typical gate frame widths of approximately 29" to 52".
- Is this kit compatible with a 3-inch O.D. latch post?
- Yes. The adjustable receiver bracket is designed for a 3" O.D. latch post and allows fine strike alignment.
Comparison
- 6040-KIT (this product) — Economy exit bar with lock box and keyed cylinder for exterior entry.
- 6045-KIT (Superior) — Upgrades to Detex VS device with lock box for stronger performance.
- 10045-KIT (Premium) — Stainless Detex Advantex device + lock box for high-traffic, harsh environments.
