Product Description
DAC Stealth Square Cantilever Gate Roller Assembly — For 2" Square Gate Frames
- Smooth, quiet travel — Graphite-impregnated polymer rollers deliver low-friction, low-noise motion for long runs.
- Commercial steel chassis — Formed steel body with galvanized protection stands up to weather and daily use.
- Made for 2" square frames — This model fits 2" square gate frames used on cantilever systems.
- Post compatibility — Stealth series offers models for square or round gate posts; choose the post size that matches your install.
- Operator-friendly — Smoother rolling reduces shock loads on automated gate openers compared to cast-steel rollers.
Engineered for demanding commercial sites, the DAC Stealth square cantilever roller uses a graphite-impregnated polymer wheel set to keep movement smooth, quiet, and consistent across the full travel of the gate. The formed, galvanized steel chassis resists corrosion and provides a rigid mounting surface that helps maintain alignment over time. Because the roller carries the frame instead of riding on ground track, it minimizes debris interference and seasonal issues that plague angle-iron systems. Installers appreciate the predictable feel when hand-sliding the leaf during setup and service, which makes it easier to fine-tune alignment at the latch and receiver. If your project uses round posts, see the DAC Stealth Round Cantilever Gate Roller; for shielding pinch points and debris, add Stealth Cantilever Roller Covers to the top and bottom carriers.
Selecting the correct variant is straightforward: this model is sized for a 2" square gate frame, and Stealth carriers are available to match either square or round gate posts on your project. Most cantilever gates use four carriers total—two top and two bottom—so plan quantities accordingly when building out a complete set. Compared to traditional cast-steel assemblies, Stealth’s polymer wheel and sealed bearing design help reduce noise and maintenance while maintaining stable tracking. The result is a system that rolls easily, protects components, and stays aligned longer with less upkeep across seasons. When specified and installed correctly, it’s a durable, professional solution for high-cycle entrances and operator-driven gates.
Specifications
| Series | DAC Stealth Cantilever Roller — Square Gate Frame model |
| Gate Frame Fit | 2" square gate frame |
| Roller Material | Graphite-impregnated polymer (Stealth nylon family) |
| Chassis | Formed steel, hot-dip galvanized after fabrication |
| Post Options | Models available for square or round gate posts (select size per job) |
| Typical Set | Four rollers per gate (two top, two bottom) |
Installation (Quick Steps)
- Confirm sizes — Verify 2" square gate frame and your post size/type (square or round).
- Mount carriers — Install rollers to the post per orientation; leave hardware slightly loose.
- Set height & plumb — Position the gate frame in rollers; adjust for level, plumb, and smooth travel.
- Tighten & guard — Torque hardware and install roller covers for safety and debris protection.
Buying Guide
- Match the frame — This SKU fits 2" square frames; select the correct post style/size in your options.
- Round-post alternative — Use the Stealth round cantilever roller when your posts are round.
- Add covers — Order Stealth roller covers (top & bottom) to shield pinch points and reduce debris.
To meet prevailing U.S. gate safety standards, all exposed, weight-bearing rollers and pinch points less than 8 ft above grade must be guarded/covered on slide and cantilever gates (UL 325 / ASTM F2200). Always verify local adoption with your authority having jurisdiction (AHJ).
Frequently Asked Questions
- How many rollers do I need?
- Most cantilever gates use four rollers — two top and two bottom — sized to your posts and a 2" square frame.
- What’s the advantage over cast-steel rollers?
- Stealth polymer rollers run smoother and quieter, with sealed bearings and a galvanized chassis for lower maintenance.
- Are roller covers optional?
- No. Under UL 325 and ASTM F2200, all exposed, weight-bearing rollers and pinch points less than 8 ft above grade must be guarded/covered on slide and cantilever gates (this applies to automated systems and, per ASTM’s 2023 update, manual slide gates as well). Always confirm local adoption with your AHJ.
Comparison
- Stealth Square Cantilever Roller (this product) — For 2" square frames; models for square/round posts; smooth, low-maintenance operation.
- Stealth Round Cantilever Roller — Alternative when your posts are round; same Stealth polymer/galvanized construction.
- Cast-Steel Cantilever Rollers — Traditional style; heavier and noisier with more routine upkeep.
