Product Description
Malco® 10" Fence Pliers — 3 Built-In Wire Cutters (Cuts Up to 9-Ga Wire)
- Three cutting positions — Built-in cutters provide multiple bite points so you can cut cleanly in tight spots.
- Cuts up to 9-ga wire — Handles common fence wires used for chain link, field fence, and repairs (within rating).
- Do-it-all head — Grips, twists, pulls, and cuts; ideal for tying, tensioning, and general fence maintenance.
- 10" leverage — Longer handle length gives extra cutting and pulling power with good control.
- Jobsite-ready — Durable construction for everyday contractor use.
These 10" fence pliers are a versatile, single-tool solution for everyday fence work. Use the integrated cutters to trim wire up to 9-ga, then use the jaws to twist and tie wire securely. For stretching fabric to terminals, pair with a PulJak® Type A Puller and finish with tension/brace bands.
Why Choose These Pliers
- Multi-function efficiency — One tool for cutting, gripping, twisting, and quick pull-adjustments.
- Cleaner cuts — Multiple cutting edges let you choose the angle that keeps your hands clear of fabric/posts.
- Field friendly — Compact enough for a pouch; tough enough for all-day installs and repairs.
Specifications
| Tool Type | 10" fence pliers with three integrated wire cutters |
| Overall Length | 10" (254 mm) |
| Max Cutting Capacity | Up to 9-ga (within material hardness rating) |
| Primary Uses | Cutting, gripping, twisting fence wire; general chain link/field fence repair |
| Construction | Heavy-duty plier body with hardened cutting edges |
How to Use (Quick Steps)
- Select a cutter — Choose the cutting position that gives the safest hand clearance.
- Cut square — Place wire deep in the cutter for best leverage; squeeze smoothly to finish the cut.
- Twist & tie — Use the jaws to grip and twist tie-wire, then snug by hand.
- Safety — Wear eye protection and keep hands clear of freshly cut wire ends.
Buying Guide
- Wire size — If you routinely cut wire heavier than 9-ga or hard-drawn steel, consider dedicated bolt cutters.
- Workflow — Add a PulJak® Puller for stretching and use these pliers for cut/tie steps.
- Maintenance — Keep cutting edges clean and dry; avoid cutting hardened rod or nails to preserve edge life.
Frequently Asked Questions
- What wire can these cut?
- General fence wires up to 9-ga within the tool’s material rating. For harder or larger stock, use bolt cutters.
- Are the cutting edges replaceable?
- No—cutters are integrated. Maintain edges by using the tool within its rated capacity.
- Can I use these on chain link fabric?
- Yes—use the cutters to trim wire ends and the jaws to twist tie-wire during install or repair.
Comparison
- 10" Fence Pliers (this tool) — Everyday cut/grip/twist up to 9-ga.
- Bolt Cutters — Heavy cuts on larger/harder wire and small rod.
- Linesman’s Pliers — General electrical/utility pliers; not optimized for fence work.
