Product Description
Catalyst Chesapeake Standard Closed Spindle Privacy Gate — Choose 4′ or 5′ Wide
- Closed spindle accent — Matches the Chesapeake panel’s decorative top with a full-privacy lower field.
- Two gate widths — Choose 4′ (46″ actual) for walk entries or 5′ (58″ actual) for wider access or paired double-drive openings.
- Element Reserve rails — Built on the 1.75″ x 7″ Element Reserve profile for clean lines and long-run stability.
- Smooth solid colors — Available in White, Sand, and Clay to coordinate with Chesapeake sections.
- Hardware sold separately — Select vinyl-compatible hinges/latches sized for the gate width and expected use.
Chesapeake Standard Closed Spindle Privacy Gates complete your accent-top privacy runs with the same refined look as the sections. Each 6′-tall leaf uses horizontal frame rails in the Element Reserve profile and a closed-spindle accent above the solid privacy horizontal infill for a cohesive, refined look. Match your gate to Chesapeake Standard 6′ x 8′ panels, and finish posts with 5″ x 5″ caps for a unified appearance.
Why Choose This
- Unified system aesthetics — Gate design mirrors Chesapeake panels for a seamless fence line.
- Right-sized access — Factory widths of 46″ and 58″ suit walkways or larger openings; pair two 58″ leaves for a double drive.
- Low maintenance — Color-through vinyl cleans easily and never needs paint.
Specifications
| Product | Chesapeake Standard Closed Spindle Privacy Gate (Vinyl) |
| Height | 6′ nominal |
| Available Widths | 4′ (46″ actual), 5′ (58″ actual); pair two 5′ leaves for double-drive |
| Frame / Rails | Element Reserve rails (approx. 1.75″ x 7″) |
| Infill | Closed spindle accent above full-privacy tongue-and-groove lower field |
| Colors | White, Sand, Clay (smooth solid finish) |
| Gate Posts | 5″ x 5″ routed vinyl posts; reinforcement recommended at gate locations (sold separately) |
| Hardware | Hinges/latches sold separately; use vinyl-compatible sets rated for gate size/weight |
Installation (Quick Steps)
- Set reinforced posts — Install 5″ x 5″ gate/end posts in concrete per code; add 5″ x 5″ Gate Post Inserts for stiffness and reliable hardware bite.
- Hang the gate — Mount hinges to post and stile; plumb/level the leaf and confirm ground clearance through full swing.
- Install latch & stop — Fit a rated latch; for double leaves, add a drop rod/cane bolt to the inactive side.
- Finish — Match surrounding sections with Chesapeake Standard panels for a consistent top line and accent pattern.
Buying Guide
- Choose width by use — 46″ for typical pedestrian access; 58″ for wider clearance or pair two for a drive opening.
- Match your system — Coordinate colors and rail profile with Chesapeake Standard panels and routed posts.
- Plan hardware early — Select hinges/latches rated for gate width, frequency of use, and exposure conditions.
Frequently Asked Questions
- What are the actual widths of the 4′ and 5′ gates?
- The 4′ gate is approximately 46″ wide and the 5′ gate is approximately 58″ wide to allow for hinges, latch, and clearances.
- Will this gate match my Chesapeake Standard panels?
- Yes. It uses the same Element Reserve rails, smooth solid colors (White, Sand, Clay), and the closed-spindle accent over a full-privacy lower field.
- Are hinges and latches included?
- No. Hardware is sold separately so you can choose vinyl-compatible sets sized for your gate’s width and expected traffic.
- Do I need to reinforce the gate posts?
- Reinforcement is strongly recommended. Use 5″ x 5″ gate post inserts and properly sized concrete footings for long-term alignment.
- Can I create a double-drive opening?
- Yes. Pair two 58″ leaves, add a drop rod to the inactive leaf, and choose hinges rated for the combined load.
Comparison
| Product | Main Use / Benefit | Notes |
|---|---|---|
| Chesapeake Standard Gate (this item) | Closed-spindle accent with full-privacy lower field for cohesive entries. | Factory widths of 46″ and 58″; hardware and posts sold separately. |
| Madison Standard Solid Gate | Horizontal, full-privacy aesthetic with smooth solid finishes. | Different visual style (no spindle accent). |
| Newbury Standard Solid Gate | Traditional vertical full-privacy look in smooth solid colors. | No decorative accent at the top. |
Need help planning your opening? Tell us your gate width, swing direction, and site conditions—we’ll help you select posts, inserts, hinges, and latches for a clean, long-lasting Chesapeake installation.
