Catalyst Newbury Select Woodgrain Solid Privacy Gate

Product Description

Catalyst Newbury Select Smooth Woodgrain Solid Vertical Privacy Gates — Cypress & Coastal Cedar

• Gate system for Newbury Select Woodgrain fences — Pre-built solid privacy gates designed to match Newbury Select Smooth Woodgrain fences in 6′ x 6′, 6′ x 8′, and 8′ x 6′ configurations.
• Two popular widths — Available in 4′ nominal walk gates (46" actual width) and 5′ nominal gates (58" actual width).
• Walk or drive layouts — 4′ gates are ideal as stand-alone walk gates, while 5′ gates are commonly paired into double-drive openings.
• Matches Newbury Select panels — Uses solid vertical boards and decorative rails that coordinate with Newbury Select Smooth Woodgrain privacy panels.
• Color-matched finishes — Available in Cypress and Coastal Cedar to blend with your Newbury Select Smooth Woodgrain fence runs.

Catalyst Newbury Select Smooth Woodgrain Solid Vertical Privacy Gates complete your Newbury Select fence with walk and drive entries that look like a seamless extension of the fence line. Each gate is built to coordinate with the solid vertical privacy design of Newbury Select Smooth Woodgrain panels, so the tongue-and-groove infill and decorative rails carry straight across from panel to gate. Gates are offered in 4′ (46" actual) and 5′ (58" actual) leaf widths, sized to work with Newbury Select 6′ x 6′, 6′ x 8′, and 8′ x 6′ sections. Choose the 4′ gate for most pedestrian entries, or pair two 5′ gates to form a convenient double-drive opening for vehicles, trailers, or equipment. For a fully coordinated system, match these gates with Newbury Vertical Slat Vinyl Privacy Fence panels and Newbury posts in Cypress or Coastal Cedar.

Why Choose This

• Perfect match for Newbury Select Smooth Woodgrain — Gates are specifically styled to complement Newbury Select Smooth Woodgrain solid vertical privacy panels.
• Flexible entry options — Use 4′ gates as walk gates and 5′ gates individually or in pairs for wider driveways and service entrances.
• Consistent privacy and style — Solid vertical infill maintains privacy through the gate area, rather than breaking the visual barrier at access points.
• Easy system integration — Works with 5" x 5" vinyl gate posts and optional 5" x 5" aluminum gate post stiffeners for added rigidity at hinges and latches.
• Low maintenance — Vinyl construction in Select Smooth Woodgrain colors means no painting or staining; just occasional cleaning as needed.

Specifications

Installation (Quick Steps)

• Plan your openings — Decide where you need walk gates (typically 4′ / 46" leaf) and where you want a wider opening using a pair of 5′ / 58" gates for a double-drive.
• Set gate posts — Install 5" x 5" gate posts in properly sized concrete footings, allowing for hardware clearances and the actual gate leaf widths. Consider reinforcing posts with aluminum gate post stiffeners, especially at double-drive openings.
• Hang the gate(s) — Attach hinges to the gate frame and gate post, ensuring the gate is level and swings freely. For double drives, install one gate at a time and align the meeting edges carefully.
• Install latch and drop rods — Add a latch at the walk gate or active leaf, and use a drop rod or cane bolt at the inactive leaf on double-drive gates to hold it in the closed or open position.
• Fine-tune and secure — Adjust hinge tension and latch alignment as needed, then check clearance over the ground through the full swing to ensure smooth operation.

Buying Guide

• Choose gate width — A 4′ (46" actual) gate is usually perfect for everyday walk-through access, while a 5′ (58" actual) leaf is ideal to pair into a double gate for mower, trailer, or vehicle access.
• Match gate height to your fence — Order gates that correspond to your Newbury Select Smooth Woodgrain fence height (6′ or 8′) for a clean top line.
• Plan gate post reinforcement — Heavier or wider gates are easier on your posts when you reinforce them. Add aluminum inserts or similar stiffeners for key gate posts, especially on double-drive openings.
• Coordinate hardware — Choose hinges and latches rated for vinyl gates and sized for your gate width and weight. For a cohesive look, pair these gates with vinyl-compatible hardware in finishes that match nearby accents.
• Confirm layout and code requirements — Ensure gate locations and swing directions work with slopes, driveways, pools, and local access or pool-code rules before finalizing your order.

Frequently Asked Questions

What Newbury Select fence sizes do these gates work with?

These Newbury Select Smooth Woodgrain gates are designed to work with Newbury Select 6′ x 6′, 6′ x 8′, and 8′ x 6′ solid vertical privacy fence sections.

What are the actual widths of the 4′ and 5′ Newbury Select gates?

The 4′ gates are approximately 46" wide, and the 5′ gates are approximately 58" wide. These dimensions help allow for hinge, latch, and clearance space within typical vinyl gate openings.

How are 5′ Newbury Select gates typically used?

While 5′ gates can be used alone, they are most often paired together as a double-drive gate, providing roughly a 10′ wide opening (actual clear width depends on posts and hardware).

Do these gates come with hinges and latches?

Gate leaves are typically sold separately from hardware, so you can choose hinge and latch sets that match your project’s style, security needs, and budget.

Can I mix Newbury Select Smooth Woodgrain gates with standard Newbury or TimberGrain LX panels?

These gates are color-matched to Newbury Select Smooth Woodgrain panels in Cypress and Coastal Cedar. While they can function alongside other Newbury styles, the colors and finishes may not match exactly if you mix different collections.

Comparison

Need help choosing how many 4′ vs 5′ Newbury Select gates you need? Share your fence layout and we’ll help you size openings, select gate widths, and choose reinforcement and hardware for a smooth, long-lasting installation.