Product Description
Catalyst Newbury Standard Solid Vertical Privacy Gates — Element Signature Rail
- Built to coordinate with Newbury Standard solid vertical privacy panels using the Element Signature 1.75" x 5.5" rail.
- Two popular widths — Choose 4′ (approx. 46" actual leaf width) or 5′ (approx. 58" actual leaf width) to fit typical walk and drive openings.
- Solid privacy infill — 7/8" x 6" tongue-and-groove boards maintain full privacy through the gate line.
- Low maintenance — Smooth, color-through vinyl resists fading and never needs paint.
Catalyst Newbury Standard Solid Vertical Privacy Gates complete your Newbury Standard fence with clean, secure entries that look like a seamless extension of the panel runs. Each gate uses the same Element Signature rail and solid tongue-and-groove infill for consistent privacy and style, and is available in 4′ (46" actual) and 5′ (58" actual) widths to suit pedestrian and driveway access. Select the gate that matches your fence’s panel size (eg. 6′ x 6′ vs. 6′ x 8′) for proper alignment and fit.
For a cohesive look, pair these gates with Newbury Standard panels in the same height and color.
Why Choose This
- Perfect system match — Built on the Element Signature rail for a unified top line and frame detail.
- Privacy where it matters — Solid T&G infill maintains sightline control through the entry.
- Sizing that makes sense — 46" walk gates for everyday access; 58" gates used singly or paired for wider openings.
- Easy coordination — Gate selection tied to your panel size simplifies ordering and install.
Specifications
| Product | Catalyst Newbury Standard Solid Vertical Privacy Gate (vinyl) |
| Fence System Compatibility | Newbury Standard Solid Vertical panels using Element Signature 1.75" x 5.5" rails |
| Available Gate Widths | 4′ nominal (~46" actual leaf); 5′ nominal (~58" actual leaf) |
| Gate Height | Matches panel height (e.g., 4′, 5′, 6′, or 8′ depending on fence) |
| Infill | 7/8" x 6" tongue-and-groove vinyl boards (full-privacy) |
| Frame / Rails | Element Signature top & bottom rails (approx. 1.75" x 5.5"), other rail styles available upon request. |
| Color Options | Coordinates with Newbury Standard panel colors by height/SKU |
| Hardware | Hinges, latches, and drop rods sold separately; choose vinyl-compatible sets rated for gate width/weight |
| Gate Posts | 5" x 5" vinyl gate/end posts set in concrete; reinforcement recommended at wider gates |
| Maintenance | No painting or staining; periodic cleaning with mild soap & water |
| Warranty | Limited lifetime vinyl fence warranty (per manufacturer) |
Installation (Quick Steps)
- Confirm layout & sizing — Match the gate SKU to your fence panel size (e.g., 6′ x 6′ vs. 6′ x 8′) and select 46" or 58" leaf width as needed.
- Set gate posts in concrete — Install 5" x 5" posts plumb and to depth for local frost/wind; consider reinforcing key posts with aluminum inserts, especially for 58" leaves or double-drive setups.
- Hang the gate — Mount hinges to post and stile, level the leaf, and verify swing clearance over grade.
- Add latch & drop rod — Install a suitable latch; for paired gates, add a cane bolt/drop rod to the inactive leaf.
- Final adjustments — Align latch strike, verify reveal, and confirm smooth operation through full travel.
Buying Guide
- Pick the right leaf width — Use 46" for most walk gates; 58" for mower/equipment access or pair two for a double-drive.
- Match your fence — Order the gate version that corresponds to your panel size (6′ x 6′ vs. 6′ x 8′) to keep rail and picket lines consistent.
- Reinforce posts where needed — Wider gates benefit from aluminum inserts and heavier hinges; plan ahead for hardware loads.
- Coordinate components — Pair with Newbury Standard panels and matching 5" x 5" posts/caps for a unified look.
- Plan hardware — Choose vinyl-compatible hinges/latches rated for your gate width and usage; add a drop rod for double leaves.
Frequently Asked Questions
- What are the actual widths of the 4′ and 5′ Newbury Standard gates?
- The 4′ gate is approximately 46" wide and the 5′ gate is approximately 58" wide, allowing room for hinges, latch, and clearances within a typical opening.
- How do I choose the correct gate if my fence uses 6′ x 8′ panels?
- Select the gate version designated for 6′ x 8′ layouts; gates are matched to panel sizes so rail and picket lines align across the opening.
- Can I pair two 5′ gates for a double-drive opening?
- Yes. Two 58" leaves can be paired for a wide opening. Use properly set gate posts, add a drop rod/cane bolt, and choose hinges rated for the combined load.
- Do these gates include hinges and a latch?
- No. Hardware is sold separately so you can select vinyl-compatible hinges and latches that fit your use case and budget.
- Will the color match my Newbury Standard panels?
- Yes. Gates are offered to coordinate with Newbury Standard panel colors by height and SKU. Order the same height/color for a consistent look.
Comparison
| Option | Strengths | Considerations | Best For |
|---|---|---|---|
| Newbury Standard Privacy Gate (this item) | Matches Newbury Standard panels; Element Signature rails; 46" and 58" widths for walk or drive entries. | Smooth solid colors only; not wood-textured. | Projects using Newbury Standard panels where cohesive style and value are priorities. |
| Newbury Select Smooth Woodgrain Gates | Smooth woodgrain colors (Cypress, Coastal Cedar) for a warmer look with the same solid privacy layout. | Different finish; best paired with Select Smooth Woodgrain panels. | Customers seeking a wood-inspired appearance without textured surfaces. |
| Newbury TimberGrain Premium LX Gates | Textured TimberGrain finish and heavier LX rail options for a premium wood-look presentation. | Higher cost; distinct texture and palette vs. Standard. | Showcase installs where the most realistic wood look is desired. |
Need help selecting the right gate width and SKU for your Newbury layout? Share your panel sizes and opening locations and we’ll help you choose gates, posts, and hardware for a smooth, long-lasting install.
