Chain Link Gate Fork, Galvanized - Multiple Sizes

Product Description

Chain Link Gate Fork for Fork Latch — Galvanized, Multiple Sizes (Padlock-Ready)

• Simple, Reliable Latching — Classic fork style captures the gate frame for a secure close
• Galvanized Steel — Corrosion-resistant zinc finish for long outdoor service
• Padlock-Ready — Works with a compatible fork clamp to accept a padlock
• Multiple Sizes — Fits common latch post sizes from 1-3/8″ to 3″ (see specs)
• Field-Friendly — Pairs with a gate fork clamp and two carriage bolts for a clean bolt-on install

This galvanized chain link gate fork is the dependable, everyday latch head used on residential walk and drive gates. Combine it with the properly sized fork clamp and two 5/16″ × 1-1/4″ carriage bolts to create a complete fork latch. The zinc-coated steel resists rust and weather, while the fork geometry offers a positive, repeatable catch. When used with a compatible clamp, the assembly can be padlocked for extra security.

Why Choose This

• Proven design — Time-tested fork latch function that’s easy to operate and service
• Durable finish — Hot-dip galvanized steel stands up to rain, snow, and sun
• Clean hardware stack — Minimal parts for a neat, low-maintenance closure
• Sized for your post — Options from 1-3/8″ through 3″ keep fitment straightforward

Specifications

Installation

Place the fork between the two halves of your gate fork clamp and align the three bolt holes. Insert a 5/16″ × 1-1/4″ carriage bolt through each aligned hole and tighten. Install a second carriage bolt at the opposite end of the clamp to secure it to the gate post. Verify smooth engagement with the gate frame and add a padlock if desired (with compatible clamp).

Buying Guide

• Size selection: Choose the fork size that matches your latch post outside diameter (see table for actual O.D.).
• Complete the kit: You will need a fork clamp sized to your post and two 5/16″ × 1-1/4″ carriage bolts (not included unless specified).
• Padlocking: Use a compatible clamp with a padlock tab/through-hole to lock the fork closed.
• Finish care: Galvanized steel is suitable for most climates; rinse after exposure to de-icing salts for longest life.

Frequently Asked Questions

Does this fork include the clamp and bolts?

No. The fork is sold individually. Pair it with a properly sized fork clamp and two 5/16″ × 1-1/4″ carriage bolts.

Is it padlockable?

Yes, when used with a compatible fork clamp designed to accept a padlock.

Which size should I buy?

Match the fork size to your latch post’s actual O.D. (e.g., 2″ nominal post is 1-7/8″ actual O.D.; choose the 2″ fork).

Can I use this on a driveway double gate with a drop rod?

Yes. The fork latches the leaves together; a drop rod secures the pair to the ground. They’re commonly used together.

Will it fit 2″ nominal pipe?

Yes. 2″ nominal round pipe is 1-7/8″ actual O.D., which corresponds to the 2″ fork size in the table.

Comparison

• Fork Latch (this item + clamp): Simple, low-profile, padlock-ready; ideal for most residential gates.
• Malleable Fork Latch Assembly: Heavier casting and different geometry; often used where extra rigidity is preferred.
• Residential STRONG ARM®-style Latches: Close at the leading edge without a drop rod; more parts and adjustments than a basic fork latch.