Chain Link Heavy Aluminum Rail End Caps - Multiple Sizes

Product Description

Heavy Aluminum Rail End for Chain Link — 1-3/8″ & 1-5/8″ Top/Mid/Bottom Rail (Press-Fit Cup)

• Terminates Round Rails Cleanly — Cup-style fitting captures rail and bolts to a terminal, corner, or gate post
• Heavy-Duty Aluminum — Rust-proof, cast construction for long outdoor service
• Versatile Placement — Use for top rail, mid rail, or bottom/brace rail terminations
• Standard Post Hardware — Works with a brace band + carriage bolt on the post (sold separately)
• Installer-Friendly — Smooth cup accepts the rail easily; ear aligns with the band for a fast, square connection

Finish your chain link rails with a heavy aluminum rail end. The cup captures the round rail, while the ear bolts to a brace band on the terminal, corner, or gate post to create a rigid, professional termination. Choose 1-3/8″ or 1-5/8″ to match your rail size. Aluminum construction won’t rust, making it a great choice for coastal and high-moisture environments.

Why Choose This

• Corrosion resistant — Solid aluminum resists rust better than pressed steel alternatives
• Strong & neat — Cup-and-ear design holds alignment and looks clean on finished runs
• Multi-position — One fitting style for top, mid, and bottom/brace rails
• Compatible — Uses common brace bands and carriage bolts stocked on most trucks

Specifications

Installation

Slide the round rail fully into the cup. Place a brace band around the post at the rail height with the band’s square hole aligned to the rail end ear. Insert the carriage bolt from the band side through the ear, add the nut, and tighten until snug. Keep the rail level and the ear square while tightening. For bottom/brace rails, repeat at the lower elevation; for corners, set the band orientation to match the rail approach.

Buying Guide

• Match the rail: Order 1-3/8″ for 1-3/8″ O.D. rails or 1-5/8″ for 1-5/8″ O.D. rails.
• Match the post band: Choose brace bands sized to your post O.D. (e.g., 2-3/8″, 2-7/8″, 4″).
• Bolt selection: Use a carriage bolt diameter that fits your band (often 5/16″ or 3/8″); choose length to pass through the band, ear, and nut with a few threads showing.
• Alternatives: For pass-through on line posts, use a line rail (boulevard) clamp. For galvanized steel versions, see pressed-steel rail ends. For odd angles, consider a swivel rail end (if available).

Frequently Asked Questions

What’s the difference between this and a pressed-steel rail end?

Function is the same; the heavy aluminum version is rust-proof and typically thicker, while pressed steel is galvanized, heavier by feel, and more economical.

Do I need any other fittings?

Yes. You’ll need a brace band sized to your post and a carriage bolt & nut to connect the rail end ear to the band.

Can I use this for bottom/brace rail?

Yes—rail ends are commonly used to terminate bottom/brace rails at terminal and gate posts.

Will aluminum match my galvanized framework?

Yes. The natural silver aluminum blends well with galvanized components; you can also paint if a specific color is required.

How many rail ends do I need?

One per terminated rail. For corners with two rails meeting a single post, use two rail ends and two brace bands (or a combo band if preferred).

Comparison

Not sure which size, band, or bolt you need? Contact us and we’ll help you dial in the right combination for your framework.