Product Description
- Matches Common Chain Link Colors: Black, Brown, and Green
- Run Top Rail or Tension Wire Along the Top of Your Chain Link Fence
- Use with Color Chain Link Line Posts
- Powder Coated Aluminum Construction Won't Rust
- Easy to Install, Tension Set Over Post
Color Aluminum Loop Caps are designed to allow horizontal top rail or tension wire to run along the top of the fence. The rail / wire runs through the hole on the loop cap in one continuous line to a terminal post. If using barb wire, then you should not use a loop cap; use a line post barb arm instead, which also has a loop in it for top rail. Aluminum loop caps are typically used on residential chain link fences, while steel caps are used on commercial / industrial projects.
Specifications
| Loop Cap Size |
1-5/8" x 1-3/8" |
2" x 1-3/8" |
| Actual Post Size (O.D.) | 1-5/8" | 1-7/8" |
| Actual Rail Size (O.D.) | 1-3/8" | 1-3/8" |
| Weight | .4 | .45 |
| Material | Powder Coated Aluminum | Powder Coated Aluminum |
| Finish | Black, Brown, Green | Black, Brown, Green |
| Hardware | None Required | None Required |
| Typical Usage | Light Residential Chain Link | Residential Chain Link |
Installation
Place your color chain link aluminum loop cap on the top of your chain link line posts with the sides facing perpendicular to the fence line. The fit will be tight, but push them down on the cap until it is fully on the post.
Tip: If your loop caps get scratched, you can touch them up with a can of spray paint. We sell custom formulated paint to match the powder coat, or you can have your own mixed.
