Product Description
Color Chain Link Flat Tension Bands — Residential Grade (Black, Brown, Green)
- Secure the Fabric at Terminals — Holds the tension bar tight to end, corner, and gate posts for a clean, even finish
- Residential Grade, Contractor-Trusted — Pressed steel with a durable color coating for dependable outdoor service
- Standard Hardware — Uses 5/16″ × 1-1/4″ carriage bolt & nut (sold separately)
- Multiple Sizes — Fits common round post O.D.s from 1-3/8″ up to 3″ (2-7/8″ O.D.)
- Blend-Intent Finishes — Black, Brown, and Green coatings formulated to blend with most color-coated systems (exact matches not guaranteed)
Finish color-coated terminals cleanly with flat tension bands that clamp your tension bar to the post for a tidy, square pull. For a consistent look at your posts, pair these bands with matching color rail end caps.
Why Choose This
- Clean, reliable hold — Keeps fabric tight and aligned at every terminal
- Weather-ready — Color-coated pressed steel stands up to outdoor exposure
- Installer-friendly — Familiar orientation and bolt sizing speeds up assembly
- Great value — Cost-effective choice for residential color systems, kennels, and panels
Specifications
| Band Size (Fits Post O.D.) | 1-3/8″ | 1-5/8″ | 1-7/8″ (2″) | 2-3/8″ (2-1/2″) | 2-7/8″ (3″) |
| Material | Pressed steel | ||||
| Finish Colors | Black, Brown, Green — formulated to blend with common color-coated systems (no exact-match guarantee) | ||||
| Required Hardware | 5/16″ × 1-1/4″ carriage bolt & nut (not included) | ||||
| Approx. Weight (each) | 0.20 lb | 0.23 lb | 0.25 lb | 0.28 lb | 0.32 lb |
| Typical Usage | Residential color-coated fences & gates, kennel panels, temporary fence panels | ||||
Installation
Place the band around the terminal post with the square hole toward the pull. Insert the tension bar through the fabric diamonds and into the band. Install a 5/16″ × 1-1/4″ carriage bolt & nut and tighten until snug. Typical spacing is about every 12″ (up to 18″ in some cases). As a rule of thumb, use one fewer band than the fence height in feet (e.g., 6′ fence → 5 bands). For fasteners, see our galvanized carriage bolts.
Buying Guide
- Choose by post O.D.: Select the band size that matches your terminal post outside diameter.
- Color expectations: Coatings are intended to blend with common Black/Brown/Green systems across fabric, framework, and fittings; exact matches vary by brand and age.
- Galvanized alternative: Prefer silver hardware or mixing finishes? See our galvanized flat tension bands.
Frequently Asked Questions
- What’s the difference between flat and beveled tension bands?
- Flat bands are a lighter, economical choice for residential fences. Beveled bands are heavier-gauge and common on commercial jobs.
- How many bands do I need at a terminal post?
- Typical spacing is about every 12″; many installers use one fewer band than the fence height in feet (e.g., 6′ fence → 5 bands).
- Are bolts included?
- No. Order 5/16″ × 1-1/4″ carriage bolts & nuts separately.
- Will the color match my fence exactly?
- Not necessarily. These finishes are intended to blend with common Black/Brown/Green systems, but exact matches can vary by brand and age.
- Do these fit square posts?
- No. These are sized for round post O.D.s. Use hardware designed for square posts if needed.
Comparison
| Option | Strengths | Considerations | Best For |
|---|---|---|---|
| Color Flat Tension Band (this item) | Blends with color systems; economical; residential gauge | Exact color match not guaranteed | Color-coated residential fences & panels |
| Galvanized Flat Tension Band | Classic silver look; widely stocked | Not color-coated | Standard galvanized systems |
| Beveled Tension Band (Galv.) | Heavier-gauge; cleaner seating for tension bar | Higher cost | Commercial or higher-load applications |
Need help matching sizes and finishes for a complete color-coated terminal? Contact us and we’ll help you plan a fence-contractor-grade setup that looks clean and lasts.
