Product Description
DAC Industries Premium Exit Bar Gate Kit w/ Alarmed Detex Advantex Exit Bar and Lock Box for Re-Entry (10047-KIT)
- Premium Gate Kit — Surface-mount panic hardware package that provides free egress, keyed exterior entry, and an integrated alarm.
- Alarmed Detex Advantex Stainless Exit Bar — Choose 36" (#10006) or 48" (#10008); alarm sounds when the bar is pressed.
- Integrated Lock Box + Keyed Cylinder — Enables controlled re-entry from the outside of the gate.
- 24" Adjustable Mounting Plate — Adapts to gate frames approximately 29"–52" wide; pre-drilled for faster installation.
- Adjustable Receiver Bracket — Sized for a 3" O.D. latch post; fine-tunes for smooth, repeatable latching.
- Stainless Tek Screws & Fasteners — Hardware sized for typical chain link and ornamental frames.
The DAC Industries 10047-KIT combines a heavy-duty Detex Advantex stainless exit device with an integrated alarm and a weather-shielded lock box + keyed cylinder, giving you free egress, audible notification, and secure outside entry in one package. The 24" adjustable plate spans common gate frame widths, while the receiver bracket is designed around a 3" O.D. latch post to simplify strike alignment. Select the 36" or 48" device to match opening width and visibility requirements, then secure everything with the included stainless hardware for a robust, field-friendly install. If you don’t need alarm signaling, consider the non-alarmed premium kit linked below.
Specifications
| Kit / SKU | 10047-KIT — Premium Alarmed Exit Bar Gate Kit with Lock Box (re-entry enabled) |
| Exit Device | Detex Advantex stainless alarmed bar #10006 (36") or #10008 (48") |
| Re-Entry Hardware | Integrated lock box with keyed cylinder (includes keys) |
| Mounting Plate | 24" tall plate; adjusts for ~29"–52" gate frame widths; pre-drilled for device |
| Receiver / Strike | Adjustable receiver bracket for 3" O.D. latch post |
| Included Hardware | Stainless Tek screws and fasteners for typical gate frames |
| Function | Free egress (push-to-exit) with keyed outside entry; integral alarm sounds on bar activation |
| Compatibility | Chain link & ornamental metal gate frames; 3" O.D. latch post |
Why Choose This
- Alarm + access in one kit — Audible alert on egress plus keyed exterior entry, ideal for monitored gates.
- Built for tough sites — Advantex stainless construction excels in high-traffic or corrosive environments.
- Right-sized alternatives — Don’t need an alarm? See the non-alarmed premium 10045-KIT. Want VS platform with alarm? Consider 6047-KIT.
Installation (Quick Steps)
- Fit the plate to the gate leaf (≈29"–52" span); clamp, mark, and fasten square to the hinge line.
- Mount the receiver on the 3" O.D. latch post; adjust for clean bolt throw and consistent re-latch.
- Install the alarmed Advantex bar (#10006 or #10008) to the pre-drilled plate; mount the lock box and keyed cylinder; enable alarm per device instructions.
- Final checks — Cycle egress and outside entry, verify alarm trigger/reset, tighten hardware, and confirm required signage/labels.
Buying Guide
- Alarm requirement — Choose 10047-KIT when audible exit notification is required by policy; otherwise the 10045-KIT reduces maintenance.
- Platform choice — For a value-focused alarmed option, the Detex VS platform in 6047-KIT may fit your budget.
- Exit-only applications — If outside entry isn’t needed but you want alarmed egress, see 10037-KIT.
Frequently Asked Questions
- Does the 10047-KIT allow keyed entry from the outside of the gate?
- Yes. The integrated lock box and keyed cylinder provide controlled exterior access while maintaining free egress.
- What gate widths will the 24-inch mounting plate cover?
- The plate adjusts to typical gate frame widths of approximately 29" to 52".
- How does the alarm function operate on this premium kit?
- When the push bar is depressed to exit, the integral alarm sounds to alert staff and deter unauthorized egress; it can be silenced and reset per the device instructions.
Comparison
- 10047-KIT (this product) — Detex Advantex stainless alarmed exit bar with lock box & keyed cylinder for exterior entry.
- 10045-KIT (Advantex, Non-Alarmed) — Same heavy-duty platform without alarm; lower upkeep.
- 6047-KIT (VS + Alarm + Lock Box) — Alarmed Detex VS device with exterior entry; value-focused alternative.
