Product Description
DAC Universal Polyethylene Cantilever Gate Roller Cover
- Universal fit — General-purpose molded cover designed to fit most cantilever roller styles, including many non-DAC carriers.
- Safety-first guarding — Shields exposed, weight-bearing rollers to reduce pinch-point risk around moving gates.
- Tough & weatherable — Impact-resistant polyethylene stands up to sun, rain, and routine site abuse without rusting or chipping.
- Cleans up the install — Encloses moving parts for a tidy, professional appearance and better debris control.
- Fast retrofit — Installs with common hand tools; ideal for upgrades where the original system lacks covers.
This universal polyethylene guard is a versatile way to bring new and existing cantilever gates up to today’s best practices for safety and appearance. Unlike brand-specific housings, it’s sized and shaped to fit most popular roller carriers, so you can standardize one cover across mixed inventories or job sites — even when earlier installs used non-DAC hardware. The molded shell helps keep hands and clothing away from moving parts while also blocking wind-blown debris that can collect around the rollers. Because the cover is polyethylene, it won’t rust, flake, or dent like improvised metal shields, and its smooth surface wipes clean easily. Whether you’re closing out a punch list or refreshing an older system, this is a quick, durable upgrade that makes the whole entrance look finished.
Planning coverage is straightforward: order one cover per carrier on the gate leaf. Most commercial cantilever gates use four carriers (two top, two bottom), so plan the same number of covers. If you’re building a complete system from scratch, match the covers with the roller carriers that fit your posts — use the Stealth Square Cantilever Gate Roller for 2" square frames or the Stealth Round Cantilever Gate Roller for round posts. On retrofits, the universal design makes it easy to add covers even when the underlying carriers come from mixed manufacturers. The end result is smoother operation, a more professional look, and peace of mind that you’ve guarded critical moving parts.
Specifications
| Product | Universal Polyethylene Cover for Cantilever Gate Rollers |
| Material | Molded polyethylene (impact- and weather-resistant) |
| Compatibility | General-purpose fit for most cantilever roller carriers, including many non-DAC models |
| Positions | Top and bottom carriers (order one cover per carrier) |
| Typical Quantity | Four per gate leaf (two top, two bottom), as required by your carrier count |
Installation (Quick Steps)
- Verify fit — Confirm the cover clears your carrier’s roller, bracket, and hardware throughout the gate’s travel.
- Dry fit — Hold the cover in place and check for interference at both ends of travel and near the latch/receiver.
- Attach — Fasten per mounting points; do not overtighten to avoid deforming the polyethylene shell.
- Cycle & check — Move the gate through full travel; confirm the cover stays clear and remains secure.
Buying Guide
- One per carrier — Order a cover for each roller carrier on the gate leaf (commonly four per leaf).
- Universal retrofit — Ideal when you’re adding guards to mixed-brand or legacy cantilever systems.
- Building new? — Pair with carriers sized to your posts: Stealth Square or Stealth Round.
To meet prevailing U.S. gate safety standards, all exposed, weight-bearing rollers and pinch points less than 8 ft above grade must be guarded/covered on slide and cantilever gates (UL 325 / ASTM F2200). Always verify local adoption with your authority having jurisdiction (AHJ).
Frequently Asked Questions
- Are these covers optional?
- No. Under UL 325 and ASTM F2200, exposed weight-bearing rollers and pinch points below 8 ft must be guarded/covered on slide and cantilever gates (applies to automated systems and, per ASTM’s 2023 update, manual slide gates as well). Confirm local adoption with your AHJ.
- Will these fit non-DAC rollers?
- Yes. The universal design is intended to fit most common cantilever roller carriers, including many non-DAC models. Always dry-fit to confirm clearance on your specific hardware.
- How many covers do I need?
- Order one cover per carrier. Most commercial cantilever gates use four carriers (two top, two bottom).
Comparison
- Universal Polyethylene Cover (this item) — General-purpose fit for most carriers; tough molded guard for safety and debris control.
- Stealth Square Cantilever Rollers — DAC carriers for 2" square frames; add one cover per carrier.
- Stealth Round Cantilever Rollers — DAC carriers for round posts; add one cover per carrier.
