Product Description
Double Drive Gate Latch Kit — Galvanized Pressed Steel for Chain Link Double Gates (Drop-Rod Ready)
- Complete Latch Solution — Kit includes 2 drop-rod guides, 1 drop-rod handle, and the latch assembly
- Heavy Duty Steel, Galvanized Finish — Built for outdoor service life with corrosion resistance
- Straight, Smooth Operation — Guides keep the rod aligned so both leaves meet cleanly
- Drop-Rod Ready — Designed for a 1-3/8″ O.D. drop rod (not included)
- Field-Friendly Install — Clamp-on hardware mounts to round chain link gate frames
This galvanized latch kit is a reliable way to secure double swing chain link gates. The two clamp-on guides keep a 1-3/8″ cane bolt tracking straight, the handle makes daily use easy, and the latch assembly brings the leaves together before the rod drops into your stop. It’s a premium hardware set for fabricators and installers who want consistent performance without piecing together components.
Why Choose This
- All-in-one kit — includes the core parts most installs require
- Galvanized protection — resists rust and weather
- Cleaner alignment — dual guides reduce binding and fabric scrape
- Flexible workflow — works with center stops or drilled rod sockets per site preference
Specifications
| Product | Double Drive Gate Latch Kit — Galvanized |
| Kit Contents | 2 Drop-Rod Guides, 1 Drop-Rod Handle, 1 Latch Assembly |
| Drop Rod Compatibility | For 1-3/8″ O.D. drop rod (not included) |
| Frame Compatibility | Clamp-on to round chain link gate uprights (select fasteners/guide size to suit your frame) |
| Material | Pressed Steel, Galvanized |
| Finish | Silver (Zinc Galvanized) |
| Typical Usage | Chain Link Double Swing Gates (yards, fields, commercial entries) |
Installation
Mount two guides on the active leaf (one high, one low) so a 1-3/8″ drop rod slides freely. Attach the handle and latch assembly per your layout, close both leaves, then lower the rod into a center stop or drilled socket. Test movement and adjust for plumb and level.
Buying Guide
- Choose the rod: Use a straight 1-3/8″ O.D. cane bolt (fabricated or pre-made).
- Plan the stop: On soil, a drive-in center stop is quick; on pavement, use a mushroom-style center stop or a drilled/anchored socket.
- Use two guides: One near the top brace rail and one near the bottom stabilizes the rod and improves latch alignment.
- Match your frame: Ensure your guide clamps and fasteners suit the round gate upright size in your opening.
Frequently Asked Questions
- What’s included in the kit?
- Two drop-rod guides, one drop-rod handle, and the latch assembly. A 1-3/8″ drop rod is required but not included.
- How many guides should I use?
- Two guides per rod — one mounted high and one low — for smooth, straight travel.
- Do I need a center stop?
- Most installations use a center stop or a drilled rod socket to capture the rod and prevent gate drift when closed.
- Will this fit my gate frame?
- The guides clamp to round chain link gate uprights. Confirm clamp/fastener sizing matches your frame diameter.
- Is the drop rod included?
- No — supply a 1-3/8″ O.D. rod to complete the assembly.
Comparison
- This Kit (Galvanized, Pressed Steel): Clamp-on guides + handle + latch; pair with your 1-3/8″ rod and preferred center stop.
- Welded Rod Assemblies: Faster daily use once fabricated, but less adjustable after install.
- Bolt-On Cane Bolt Sets: Simple for light gates; not as robust or adjustable as a guide + rod + latch system.
