Product Description
- Connect 2 Pipes Together at a 90-Degree Angle
- Ideal for Greenhouse Construction and Other Pipe Structures
- Available in Multiple Sizes
- Cost Effective - Eliminate Pricey Joint Fittings
- Galvanized for Rust Prevention
Perlin Clamps connect two pieces of pipe together at a right (90-Degree) angle. These clamps are most commonly used in greenhouse construction to connect the framework, but they can also be used for many other products requiring a 90-degree pipe joint. Perlin clamps are a more economic and simple solution than using structural pipe fittings or welding.
Specifications
| Perlin Clamp Size | 1-3/8" x 1-3/8" |
1-5/8" x 1-3/8" |
1-5/8" x 1-5/8" |
| Actual Pipe Size (O.D.) | 1-3/8" x 1-3/8" | 1-5/8" x 1-3/8" | 1-5/8" x 1-5/8" |
| Weight | .40 lbs | .4 lbs | .4 lbs |
| Material | Galvanized Steel | Galvanized Steel | Galvanized Steel |
| Finish | Silver | Silver | Silver |
| Hardware | 2 - 5/16" x 1-1/4" Carriage Bolt (Not Included) | 2 - 5/16" x 1-1/4" Carriage Bolt (Not Included) | 2 - 5/16" x 1-1/4" Carriage Bolt (Not Included) |
| Typical Usage | Greenhouses & Other Structures | Greenhouses & Other Structures | Greenhouses & Other Structures |
Installation
Place your two pieces of pipe at a right angle to each other. put each side of the Perlin clamp around the first pipe and over/under the second pipe so that the bolt holes on the edges line up. Secure each side with a 5/16" x 1-1/4" Carriage Bolt.
