Product Description
OZCO® OWT™ Ironwood Post-to-Beam Bolt Inline Connector — 2-Pack (For 6″+ Posts)
- Inline Bolt Pattern — Top holes align in a straight line for a clean, consistent look across the beam
- “Third-Hand” Ledge — Integrated post ledge supports the beam while you align, mark, and fasten for faster, safer installs
- Adapts to Beam Thickness — Interlocking top cover plate self-registers to the ledge and works with smooth or rough-cut lumber
- Outdoor-Ready Build — Heavy 3/16″ galvanized steel with a black exterior powder coat; ACQ-compatible
- OWT System Match — Coordinates with Ironwood posts, bases, cap nuts, and fasteners for a cohesive look
- Two Connectors per Pack — Use one pack per post-to-beam connection (left/right)
The OZCO OWT Ironwood Post to Beam Inline Bolt Connector is a great way to connect 2 parallel 2 x 4 beams to a 6" or larger wood post. The revolutionary 2-piece design has a ledge that lets you rest your beam on the connector while making your measurements; it acts as a second pair of hands that holds the beam in place until you are ready to attach it, reducing time and labor on the project. These connectors are inline, so the top bolt holes line up. You can insert 1 OWT Timber Bolt (sold separately) through each hole of both connectors and secure with the bolt. These connectors are perfect for roofs, rafters, pergolas, arbors, pavilions, & many more projects.
The Ironwood Post to Beam Connectors match the rest of the Ironwood Series from OZCO OWT Hardware. This style is characterized by clean lines, crisp angles, and an industrial chic style that is designed to elevate the look of your project.
Each OWT Post to Beam Inline Bolt Connector includes:
- 2 - Ironwood Post Ledge Base Plates
- 2 - Ironwood Top Plates
- 4 - 1-1/2" Hex Cap Nuts
- 4 - 2-3/4" OWT Timber Screws (Used for bottom plate placement only)
The Ironwood Post to Beam Inline Bolt Connector DOES NOT include OWT Timber Bolts, which are required for installation. You need to choose the size of Timber Bolt that best meets your needs. 4 bolts are needed, and are sold separately.
Why Choose This
- Faster layout — Ledge supports the beam so one person can align and fasten
- Reliable connection — Inline top holes simplify layout and appearance where a straight bolt line is desired
- Built to last — Galvanized substrate + exterior powder coat for long service life outdoors
Specifications
| Series / Style | Ironwood (OWT) — Bolt Inline Connector | |
| Post Size | For 6″ and larger wood posts | |
| Beam Compatibility | Interlocking top plate adjusts to beam thickness; compatible with smooth or rough-sawn lumber | |
| Material / Finish | 3/16″ galvanized steel with black exterior-grade powder coat; ACQ-approved | |
| Pack Quantity | 2 connectors per pack (one post ledge base + one top plate per side) | |
| Kit Contents | Post ledge bases, inline top cover plates, OWT Hex Cap Nuts, and OWT Timber Screws for the bottom hole placement | |
| Fasteners Required* | OWT Timber Bolts for the top holes (sold separately). Screws are not recommended in the top holes. | |
| Typical Usage | Pergolas, pavilions, porch roofs, and other heavy decorative framing | |
*Follow engineering, span, and embedment requirements for your project and local code.
Installation
Dry-fit and mark your beam location. Fasten the post ledge base to the post; set the beam on the ledge. Position the inline top cover plate, then drill and install the required OWT Timber Bolts through the top holes. Use the included OWT Timber Screws only for the bottom hole placement. Tighten hardware, verify alignment, and repeat on the opposite side.
Buying Guide
- Inline vs. Offset: Choose Inline for a straight top-bolt line; if you need maximum spacing between top bolts, see the Ironwood Bolt Offset Connector.
- Don’t forget fasteners: Add OWT Timber Bolts for the top holes, plus OWT Hex Cap Nuts to finish exposed faces.
- Coordinate the look: Keep extra OWT 1/4″ Timber Screws on hand for adjacent OWT brackets.
Frequently Asked Questions
- Will this work on 4×4 posts?
- It’s designed for 6″ and larger posts; follow manufacturer guidance and project engineering.
- Are Timber Bolts included?
- No. Timber Bolts are required in the top holes and are sold separately.
- Can I use screws in the top holes?
- No. Use through-bolts (OWT Timber Bolts) in the top holes for proper capacity.
- Does it fit rough-cut beams?
- Yes. The interlocking top plate adjusts to beam thickness and works with smooth or rough-sawn lumber.
Comparison
- Post-to-Beam Bolt Inline (this item): Top holes align; choose for a straight bolt line and streamlined look.
- Post-to-Beam Bolt Offset: Staggered top holes; use when you want maximum spacing between bolts.
- OWT-Lite / Screw-Fastened: Alternate variants for lighter-duty or screw-only applications.
Need help kitting Timber Bolts, cap hardware, and matching OWT brackets? Contact us—we’ll help you plan counts and compatible components for a clean, code-conscious build.
