Product Description
OZCO® OWT™ Laredo Sunset® Post-to-Beam Bolt Offset Connector — 2-Pack (For 6″+ Posts)
- Offset Bolt Pattern — Staggered top holes maximize spacing and bite through the beam for a robust connection
- “Third-Hand” Ledge — Integrated post ledge supports the beam while you align, mark, and fasten—safer, faster installs
- Adjusts to Beam Thickness — Interlocking top cover plate self-registers to the ledge and accommodates smooth or rough-cut beams
- Outdoor-Ready Build — Heavy 3/16″ pre-galvanized steel with black exterior powder coat; ACQ-compatible
- OWT System Match — Coordinates with the Laredo Sunset aesthetic across posts, bases, caps, and fasteners
- Two Connectors per Pack — One pack completes one post-to-beam junction (left/right)
The OZCO OWT Laredo Sunset Post to Beam Offset Bolt Connector Kit is an elegant solution to connecting your wood beams to 6" or larger posts. The revolutionary 2-piece design has a ledge that lets you rest your beam on the connector while making your measurements; it acts as a second set of hands that holds the beam in place until you are ready to attach it, reducing time and labor on the project. These connectors are offset, which means that the bolt holes on the upper plate are slightly offset from each other. These are used for perpendicular beams where you need the attachment bolts to not run into each other. Inline connectors are also available to meet the needs of your project. These connectors are perfect for roofs, rafters, pergolas, arbors, pavilions, & many more projects.
The Laredo Sunset Post to Beam Connectors match the rest of the Laredo Sunset Series from OZCO OWT Hardware. Bring a traditional southwestern feel to your project with hardware that is designed to be shown off rather than hidden.
Each OWT Post to Beam Offset Connector includes:
- 2 - Laredo Sunset Post Ledge Base Plates
- 2 - Laredo Sunset Top Plates with Offset Holes
- 4 - 1-1/2" Hex Cap Nuts
- 4 - 2-3/4" OWT Timber Screws (Used for bottom plate placement only)
The Laredo Sunset Post to Beam Offset Connector DOES NOT include OWT Timber Bolts, which are required for installation. You need to choose the size of Timber Bolt that best meets your needs. 4 bolts are needed, and are sold separately.
Why Choose This
- Faster layout — Beam rests on the ledge so one person can align and fasten
- Reliable connection — Offset top holes spread load and reduce fastener conflicts
- Built to last — Galvanized substrate + exterior powder coat for long service life
Specifications
| Series / Style | Laredo Sunset® (OWT) — Bolt Offset Connector | |
| Post Size | Designed for 6″ and larger wood posts | |
| Beam Compatibility | Interlocking top plate adjusts to beam thickness; works with smooth or rough-sawn lumber | |
| Material / Finish | 3/16″ pre-galvanized steel with black exterior-grade powder coat; ACQ-approved | |
| Pack Quantity | 2 connectors per pack (one post ledge base + one top plate per side) | |
| Kit Contents | Post ledge bases, offset top cover plates, OWT Hex Cap Nuts, and OWT Timber Screws for the bottom hole placement | |
| Fasteners Required* | OWT Timber Bolts for the top holes (sold separately). Screws are not recommended in the top holes. | |
| Typical Usage | Pergolas, pavilions, porch roofs, heavy decorative framing | |
*Follow engineering, span, and embedment requirements for your project and local code.
Installation
Dry-fit and mark your beam location. Fasten the post ledge base to the post; set the beam on the ledge. Position the offset top cover plate, then drill and install the required OWT Timber Bolts through the top holes. Use the included OWT Timber Screws only for the bottom hole placement. Tighten hardware, verify alignment, and repeat on the opposite side.
Buying Guide
- Offset vs. Inline: Choose Offset to stagger top bolts; use the Laredo Sunset Bolt Inline Connector when a straight top-bolt line is preferred.
- Don’t forget fasteners: Add OWT Timber Bolts for the top holes, plus OWT Hex Cap Nuts to finish exposed faces.
- Coordinate the look: Keep extra OWT 1/4″ Timber Screws on hand for adjacent OWT brackets in the same project.
Frequently Asked Questions
- Will this work on 4×4 posts?
- It’s designed for 6″ and larger posts; follow manufacturer guidance and your project’s engineering.
- Are Timber Bolts included?
- No. Timber Bolts are required in the top holes and are sold separately.
- Can I use screws in the top holes?
- No. Use through-bolts (OWT Timber Bolts) in the top holes for proper capacity.
- Does it fit rough-cut beams?
- Yes. The interlocking top plate adjusts to beam thickness and works with smooth or rough-sawn lumber.
Comparison
- Laredo Sunset Post-to-Beam Bolt Offset (this item): Staggered top holes; ideal when you want maximum spacing between bolts.
- Laredo Sunset Post-to-Beam Bolt Inline: Top holes align; choose when layout or aesthetics call for a straight bolt line.
- OWT-Lite / Standard Post-to-Beam: Alternate variants for lighter-duty or screw-fastened applications.
Need help kitting Timber Bolts, cap hardware, and matching OWT brackets? Contact us—we’ll help you plan counts and compatible components for a clean, code-conscious build.
