Product Description
PulJak® Type A Chain Link Fence / Rebar Puller — 4-Way Fence Tool (30" or 48" Rod)
- 4-way fence tool — Stretches, pulls, lifts, and aligns chain link fabric and frames with precise, pump-action control.
- Powerful & durable — Malleable, heat-treated workhead with 1,000 lb pulling capacity.
- Type A hook — Designed to hook directly to a tension bar for fast, repeatable stretches.
- Fits common posts — Workhead fits round fence posts up to 3-1/2" OD.
- Choose your reach — Available with 30" or 48" alloy steel rod.
The PulJak® Type A is the pro’s pump-jack for chain link work—built to move fabric and frames into perfect clamping position without cables or gears. Hook the Type A head to your tension bar, set the workhead on the post, and pump the handle to bring the fabric tight for banding and tie-off. For a complete setup, pair with tension bars and tension/brace bands.
Why Installers Choose PulJak®
- Controlled pulls — Ratcheting action advances in small, precise steps; easy to hold while banding.
- Fast changeovers — Hook to the tension bar and go—no stretcher bar/cable rigging required for most runs.
- One-person friendly — Compact form factor and built-in release lever aid solo installs and repairs.
- Field-proven — A staple on chain link crews for decades.
Specifications
| Tool Type | PulJak® 4-way fence tool with Type A hook (for tension bar) |
| Pulling Capacity | Up to 1,000 lb |
| Compatible Post OD | Fits round posts up to 3-1/2" |
| Rod Options | 30" or 48" alloy steel rod |
| Head Material | Rugged, malleable, heat-treated iron workhead |
| Release | Trigger/cam release to safely relieve tension |
How to Use (Quick Steps)
- Prep — Insert the tension bar through fabric at the terminal.
- Hook — Attach the PulJak Type A hook to the tension bar; place the workhead around the post.
- Pump — Ratchet the handle to draw fabric tight to clamping position.
- Secure — Install bands and clamp; then depress the release to remove tension.
Buying Guide
- 30" vs 48" rod — Choose 30" for tight spaces and gates; choose 48" for extra reach on wider gaps or larger posts.
- Type A vs Type B — Type A hooks to a tension bar (this model). Type B uses studs that hook into the chain link mesh.
- Accessory fit — Make sure your tension bars and bands match your fabric height and your terminal post OD.
Frequently Asked Questions
- What’s the difference between Type A and Type B PulJak?
- Type A hooks to a tension bar (fast, consistent for terminals). Type B hooks directly into the fabric with studs for cases where a tension bar isn’t used.
- Will it fit my posts?
- Yes—if they’re round posts up to 3-1/2" OD. That covers most residential and commercial terminal sizes.
- How do I release tension safely?
- Depress the trigger/cam release on the workhead to back off tension under control before removing the tool.
- Can I use it for rebar?
- The PulJak is commonly used to pull/position bar and small steel members on fence projects, but its primary use is stretching chain link fabric to terminals.
Comparison
- PulJak® Type A (this model) — Hooks to a tension bar; best for terminal pulls and routine stretches.
- PulJak® Type B — Hooks into the fabric via studs when a tension bar isn’t used.
- Reversed PulJak® — “Push” orientation for tight corners where you can’t stand at the post (e.g., post against a wall).
Product Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
Missing handle
I did not receive the handle! For the puljak **Signet Response** Thank you for letting us know and sorry for the mistake. A replacement handle was sent ASAP.
