Superior Outdoors 200 Series 36" or 42" Model Vinyl Railing Level Sections - Choose Your Length, & Color

Product Description

Superior Outdoor Products 200 Series 36" & 42" Model Vinyl Railing Level Sections – Choose Your Length & Color

• Clean square-baluster look — The Model style features 1.3" square vinyl balusters for a simple, modern aesthetic that pairs well with a wide range of home styles, from traditional to contemporary.
• 36" or 42" rail heights — Choose 36" level sections for standard residential decks and porches or 42" sections where a taller guardrail is desired, following local code requirements.
• Multiple section lengths — Level sections are available in a variety of lengths (commonly 5', 6', 7', and 8' level runs) so you can minimize cutting and waste on most layouts.
• Boxed kits with everything for one span — Each 200 Series Model box includes top and bottom rails with aluminum inserts, 1.3" square vinyl balusters, mounting brackets with screws, and an installation guide; posts, caps, and post trim are sold separately.
• Flat, comfortable top rail — The 200 Series uses a flat ~3-1/8" wide top rail that’s comfortable to rest a hand on and visually clean, with a simple rectangular bottom rail for a streamlined profile.
• No visible screws when installed — Snap-on bracket covers and hidden fastener details create a finished look without exposed face screws when installed according to the manufacturer’s instructions.
• Color options to match your design — Available in White, Almond, Clay, and Black (per 200 Series color offerings) so you can coordinate railing with trim, windows, and other exterior finishes.
• Made in the USA, code-focused design — Manufactured in the USA from high-quality virgin vinyl with aluminum-reinforced rails and third-party testing to IBC/IRC criteria, supported by published code reports and specifications.

The Superior Outdoor Products 200 Series Model Vinyl Railing brings together a clean square-baluster infill with the proven 200 Series flat-top rail profile. Available in both 36" and 42" heights, these level sections are ideal for decks, porches, patios, and balconies where you want a low-maintenance rail that still delivers on strength and style. The Model infill uses 1.3" square vinyl balusters set between aluminum-reinforced top and bottom rails, creating a sturdy, professional-grade system that looks great from every angle and hides fasteners behind snap-on covers. With color options in White, Almond, Clay, and Black and multiple section lengths, it’s easy to design a railing layout that fits your space and your aesthetic.

Why Choose This Railing Section

• Modern, versatile infill — Square Model balusters offer a crisp, geometric look that works equally well on newer homes and refreshed traditional exteriors.
• Options for residential and light commercial — 36" and 42" heights align with common IBC/IRC guardrail applications when used with properly installed posts and mounts (always confirm local code).
• Low-maintenance performance — Virgin vinyl and integral color help the railing resist peeling, flaking, and most everyday weathering, requiring only periodic cleaning rather than painting or staining.
• Strong, aluminum-reinforced rails — Hidden aluminum inserts in the top and bottom rails increase stiffness and help reduce deflection, especially on longer level runs.
• Fast, consistent installation — Boxed kits with rails, balusters, brackets, and instructions make it easier for contractors and DIYers to get repeatable results from section to section.
• Tested and code-oriented — The 200 Series is third-party tested to meet or exceed residential and commercial railing requirements when installed as specified, and is supported by technical specs and code documentation.

Specifications

Installation

Begin by laying out your railing line and marking post locations according to your deck or porch design and local building codes. Install structural post mounts and 4" vinyl post sleeves to the heights recommended for 36" or 42" railing. Once posts are plumb and secure, measure between posts and cut the 200 Series Model level section to length if needed, keeping in mind bracket and post clearances. Attach the supplied level mounting brackets at the correct heights on the posts, insert the aluminum-reinforced top and bottom rails into the brackets, and secure them with the included fasteners. Install the 1.3" square Model balusters according to the installation guide, maintaining proper spacing, then snap on bracket covers to conceal screws. Finish the installation with matching post caps and post trim for a complete, professional appearance.

Buying Guide

• Pick the correct height — Choose 36" sections for most residential decks and porches where permitted, or 42" sections where a taller guardrail is required or preferred by code.
• Select lengths to minimize cuts — Use a combination of 5', 6', 7', and 8' 200 Series level sections to match your total run length and reduce offcuts; remember to account for post widths in your layout.
• Match color and style — Coordinate White, Almond, Clay, or Black 200 Series Model sections with the rest of your exterior, and keep the same baluster style throughout each continuous run for a unified look.
• Plan posts and mounts together — Pair the railing with compatible structural post mounts and 4" post sleeves rated for guardrail use, especially on elevated decks and balconies.
• Consider gates and stairs — If you need stair or gate access, combine these level sections with matching 200 Series stair sections and compatible gate kits to keep the look consistent.
• Review local code and documentation — Before ordering, confirm height, loading, and spacing requirements with your local authority and review Superior’s installation guides and technical resources.

Frequently Asked Questions

What is the difference between the 36" and 42" Model level sections?

Both use the same 200 Series profile and 1.3" square Model balusters. The 36" sections are commonly used for standard residential decks and porches, while 42" sections are used where a taller guardrail is required or preferred according to local codes.

What comes in a 200 Series Model level section box?

Each boxed kit typically includes the aluminum-reinforced top and bottom rails, Model 1.3" square vinyl balusters, mounting brackets with screws, and an installation guide for one level span between posts.

Are posts and post caps included with the railing kit?

No. 4" vinyl post sleeves, structural post mounts, post caps, and post trim are sold separately so you can order exactly what your layout requires.

Which colors are available for the Model infill?

200 Series Model vinyl railing is commonly available in White, Almond, Clay, and Black, though available colors may vary by distributor and height.

Is the 200 Series Model railing code compliant?

The 200 Series is engineered and third-party tested to meet IBC/IRC guardrail requirements when installed with approved posts and mounts according to the manufacturer’s specifications. Always verify details with current technical documentation and your local building authority.

Can I mix Model balusters with other 200 Series infill styles?

The 200 Series supports multiple infill options, but for a consistent appearance most projects choose one baluster style per continuous run. Model infill is selected when a square, vinyl baluster look is desired.

Comparison

If you’d like help selecting the right 200 Series Model heights and lengths, planning posts and mounts, or coordinating color and infill options for your project, please contact us and our team will be happy to assist.