Superior Outdoors 400 Series 36" or 42" Model Deckboard Vinyl Railing Gates - Choose Your Height, Length, & Color

Product Description

Note: The product image shown is an AI-generated representation of the product and may not reflect exact details or spacing. 

Superior Outdoor Products 400 Series 36" or 42" Model Deckboard Vinyl Railing Gates – Choose Your Height, Width & Color

• Deckboard-ready drink rail gate — 400 Series Model gates feature an aluminum-reinforced top rail with a pre-installed aluminum deckboard receiver so you can add a deckboard of your choice (deckboard not included) and carry the drink-rail look across gate openings.
• 36" or 42" guard heights — Choose 36" high gates for many residential deck and porch applications or 42" high gates where a taller guard is preferred or required by local building codes.
• Two practical gate widths — Available in 36" and 48" nominal widths to fit standard walk-through openings or wider access points that need extra clearance for furniture, grills, or equipment.
• Matches 400 Series Model infill — Each gate uses the same flat 400 Series rails and Model 1.3" square balusters as your 400 Series Model level and stair sections for a seamless, coordinated appearance.
• Aluminum-reinforced rails — Both the top and bottom vinyl rails include internal aluminum reinforcement for added stiffness and long-term performance at gate openings.
• Four rail colors — Offered in White, Almond, Clay, and Black so you can match your 400 Series railing, deck, and exterior trim colors.
• Component-style gate kit — Each gate includes an aluminum-reinforced top rail with deckboard receiver, aluminum-reinforced bottom rail, two uprights, and matching Model balusters; hinges, latches, upright caps, and cross braces are sold separately.
• Professional-grade, made in the USA — Manufactured in the USA from high-quality virgin vinyl and aluminum, 400 Series gates are part of a code-conscious railing system engineered for IBC/IRC guard applications when installed per current code reports and manufacturer instructions.

Superior Outdoor Products 400 Series Model Deckboard Vinyl Railing Gates let you extend the deckboard-topped drink rail look to the access points in your railing layout. Each 36" or 42" high gate kit combines an aluminum-reinforced vinyl top rail with pre-attached deckboard receiver, a reinforced bottom rail, uprights, and Model square balusters so the gate infill matches your 400 Series Model level and stair sections. With gate widths of 36" and 48" and color options including White, Almond, Clay, and Black, these gates provide secure, low-maintenance access while preserving the clean, upgraded style that makes the 400 Series such a popular choice for entertainment-focused decks and porches.

Why Choose This Gate

• Continuous drink rail design — The pre-installed deckboard receiver on the gate top rail makes it easy to run a matching or contrasting deckboard right over the gate, keeping the drink rail design uninterrupted around the perimeter.
• Flexible height and width options — Two guard heights (36" and 42") and two widths (36" and 48") allow you to size gates for common openings, wider access points, and code-driven guard requirements.
• Low-maintenance construction — Vinyl and aluminum components resist rot, rust, and peeling paint, reducing upkeep compared to many wood or all-metal gate assemblies.
• Seamless match to 400 Series Model railing — Using Model gates with Model infill sections ensures the same baluster profile, rail shape, and color along both level runs and stairs.
• Hardware flexibility — Because hinges, latches, caps, and cross braces are sold separately, you can select the exact hardware style and performance level your project requires.
• Ideal for pros and serious DIYers — Boxed kits with rails, uprights, balusters, and an installation guide streamline layout and assembly for contractors and experienced homeowners alike.

Specifications

Installation

Begin by confirming the finished opening between the hinge and latch posts where your 400 Series Model gate will be installed. Install structural post mounts and 4" vinyl post sleeves (or compatible railing posts) so that the hinge and latch posts are plumb and properly anchored to the deck framing. Select the appropriate 36" or 42" high gate and 36" or 48" width; trim the gate rails as allowed by the manufacturer if needed to achieve the correct clearance between posts. Assemble the gate by inserting the aluminum-reinforced top and bottom rails into the uprights and installing the Model square balusters according to the 400 Series installation guide. Attach your chosen hinge set to the hinge-side upright and hinge post, hang the gate, and adjust for smooth operation and proper swing direction. Install the latch hardware at the required height, then fasten a compatible deckboard (not included) to the pre-installed aluminum deckboard receiver using the recommended fasteners. Finish the installation with matching upright caps and any optional cross bracing specified for wider gates, and verify that the gate self-closes and latches securely where required by local code.

Buying Guide

• Choose your gate height — Check local building codes to determine whether 36" or 42" guard height is required on your deck or balcony, then select the gate height that matches your 400 Series rail sections.
• Size the opening and gate width — Measure the clear opening between hinge and latch posts and decide whether a 36" or 48" wide gate is appropriate; allow for hinge and latch hardware clearances and any required self-closing devices.
• Match 400 Series Model railing — Use Model gates wherever you have 400 Series Model level or stair sections so the rail profile and balusters remain consistent around the entire perimeter.
• Plan your deckboard top — Decide whether to match the deck surface or use a contrasting board for the drink rail; confirm deckboard thickness and fastener recommendations before installation.
• Select hinges, latch, and caps — Choose heavy-duty hinges and latch hardware compatible with vinyl and aluminum, along with upright caps and optional cross braces that match your railing color.
• Confirm code and safety requirements — For elevated decks or pool barriers, verify local requirements for gate height, latch height, swing direction, and self-closing/self-latching hardware before finalizing your hardware package.

Frequently Asked Questions

What sizes are available for 400 Series Model deckboard gates?

400 Series Model deckboard vinyl gates are available in 36" and 42" nominal heights and 36" and 48" nominal widths, giving you options for standard and wider openings.

Does the gate kit include hinges and latch hardware?

No. The gate kit includes the reinforced top and bottom rails, uprights, and Model balusters, but hinges, latches, upright caps, and any cross braces are sold separately so you can choose the hardware that best fits your project.

Is the deckboard for the drink rail included with the gate?

No. The gate's top rail comes with a pre-installed aluminum deckboard receiver, but you supply the deckboard so it can match or complement your existing decking.

Will this gate match my 400 Series Model railing sections?

Yes. 400 Series Model gates are designed to use the same rail profiles, color options, and Model square balusters as 400 Series Model level and stair sections for a consistent look.

What posts should I use for a 400 Series gate?

These gates are typically hung between 4" vinyl post sleeves installed over approved structural post mounts or supports set in concrete or framing. Strong, plumb posts are essential for reliable gate performance.

Is the 400 Series system code compliant?

The 400 Series railing system is engineered and third-party evaluated as a deck and porch guard for IBC/IRC applications when installed according to current code reports and Superior's installation instructions. Always verify gate and latch details with your local building authority.

Comparison

If you'd like help choosing gate sizes, coordinating 400 Series gates with matching level and stair sections, or selecting compatible hinges and latches, please contact us and our team will be happy to assist.