Product Description
Note: The product image shown is an AI-generated representation of the product and may not reflect exact details or spacing.
Superior Outdoors 400 Series 36" or 42" York Deckboard Vinyl Railing Gates – Choose Your Height, Width & Color
- Deckboard-ready top rail — 400 Series York gates feature the same aluminum-reinforced top rail with a pre-attached aluminum deckboard receiver as the matching deckboard railing, so you can carry a drink-rail look across gate openings (deckboard not included).
- 36" or 42" tall gate options — Choose 36" high gates for most residential deck and porch applications, or 42" high gates where a taller guard height is desired or required by local code.
- 36" and 48" wide gate kits — Available in 36" and 48" widths to accommodate common walkway and deck access openings; gates can be trimmed slightly in the field if needed to fine-tune the fit.
- York 3/4" round aluminum balusters — Uses 3/4" round black York aluminum balusters for a clean, contemporary infill that pairs well with composite or wood decking.
- Aluminum-reinforced vinyl rails — Top and bottom rails are vinyl with internal aluminum reinforcement, helping the gate resist sagging and maintain alignment over time.
- Four popular rail colors — Gates are available in White, Almond, Clay, and Black to coordinate with 400 Series York deckboard level and stair sections and your home’s trim and siding.
- Unassembled boxed kit — Each gate ships as a kit with top rail, bottom rail, side uprights, York balusters, and screws so you can assemble, trim, and hang it to suit your exact opening.
- System-matched components — Designed to integrate with Superior 400 Series porch and deck railings, using the same profile, colors, and York baluster style for a cohesive look.
The Superior Outdoors 400 Series York Deckboard Vinyl Railing Gates let you carry the upscale drink-rail aesthetic of your 400 Series York deckboard railing right across your gate openings. Each kit pairs an aluminum-reinforced vinyl top rail with a pre-attached deckboard receiver, a reinforced bottom rail, and black 3/4" round York aluminum balusters, so the gate infill and profile match your level and stair sections. Available in 36" or 42" heights, 36" and 48" widths, and four rail colors (White, Almond, Clay, and Black), these gates give you the flexibility to build safe, attractive access points that feel like a natural extension of your 400 Series railing system.
Why Choose This Gate
- Seamless drink-rail transitions — Because the gate uses the same deckboard-ready top rail as your 400 Series York sections, you can run a continuous deckboard drink rail across the opening for a finished, built-in look.
- Modern mixed-material style — Black round aluminum York balusters combined with vinyl rails and your chosen deckboard create a crisp, mixed-material aesthetic that works with both traditional and contemporary homes.
- Flexible sizing for common openings — With 36" and 48" widths and 36" or 42" heights, you can match typical deck, porch, and balcony access points while staying aligned with your railing heights.
- Low-maintenance construction — Vinyl and aluminum components won’t rot, peel, or splinter like wood, and they typically require only occasional cleaning with mild soap and water.
- Part of a tested, code-focused system — These gates are built off the same 400 Series components used in guardrail sections that are engineered and third-party tested for IBC/IRC applications when installed per current specifications.
- Customizable hardware choices — Because hinges, latches, caps, and bracing are sold separately, you can tailor the hardware package to your preferred style and swing direction.
Specifications
| Attribute | Details |
|---|---|
| Brand / Series | Superior Outdoor Products — 400 Series York Deckboard Gate |
| Gate Type | Deckboard-top vinyl railing gate (boxed, unassembled) |
| Available Heights | 36" or 42" |
| Available Widths | 36" and 48" (nominal gate widths; can be trimmed slightly in field as allowed by instructions) |
| Top Rail | Vinyl top rail with pre-attached aluminum deckboard receiver and internal aluminum reinforcement (deckboard not included) |
| Bottom Rail | Vinyl bottom rail with aluminum reinforcement |
| Baluster Style | York — 3/4" round aluminum balusters (black) |
| Baluster Material | Powder-coated aluminum |
| Rail Colors | White, Almond, Clay, Black (coordinate with 400 Series York railing) |
| Kit Contents | Top rail with deckboard receiver, bottom rail, two side uprights, York balusters, and screws |
| Hardware / Accessories | Upright caps, hinges, latch, cross brace / gate brace, posts, and post mounts sold separately |
| System Compatibility | Designed to match Superior 400 Series York deckboard level and stair railing sections |
| Typical Applications | Deck, porch, and balcony gates in guardrail lines using 400 Series York deckboard railing |
| Origin | Manufactured in the USA |
Installation
Measure your gate opening between posts or gate uprights and confirm that a 36" or 48" 400 Series York gate will fit with the required hinge and latch clearances. Assemble the gate frame by installing the uprights onto the top and bottom rails, then insert the York 3/4" round balusters per the included instructions and fasten with the supplied screws. If necessary, trim the rails to fine-tune the gate width, maintaining manufacturer-recommended rail engagement into the uprights. Install a suitable 4" post sleeve over a structural post or post mount on the hinge side, then attach your chosen gate hinge set to the post and gate upright. Hang the gate, check for level and smooth swing, and then mount the latch at a comfortable, code-compliant height. Finally, fasten your chosen deckboard to the aluminum deckboard receiver in the top rail using compatible fasteners and install upright caps and any cross-brace kit if specified.
Buying Guide
- Match gate height to your railing — Choose 36" or 42" gates to align with the height of your 400 Series York deckboard rail sections so sightlines and top-rail elevations stay consistent.
- Size your gate opening — Measure the clear opening between posts and select 36" or 48" gates with room for hinges and latch hardware; plan posts and hardware before ordering.
- Coordinate colors — Use White for a classic, bright look, Almond or Clay for warmer palettes, or Black for a bold frame that pairs especially well with darker deckboards and balusters.
- Pick hinge and latch hardware — Choose heavy-duty hinges and a latch rated for railing gates, and consider self-closing or lockable options where required by local code or for child safety.
- Plan for bracing where needed — For wider gates or high-traffic areas, add a cross brace or gate brace kit (sold separately) to help prevent sag over time.
- Verify code requirements — Confirm maximum gate opening size, latch height, and guard/barrier rules with your local building authority, especially near pools or elevated decks.
Frequently Asked Questions
What sizes are available for 400 Series York deckboard gates?
These gates are available in 36" and 42" heights and in 36" and 48" nominal widths, allowing you to match common deck and porch gate openings.
Does the gate include the deckboard for the top rail?
No. The gate’s top rail includes a pre-attached aluminum deckboard receiver, but the deckboard itself is not included so you can match or coordinate with your existing decking.
What balusters are used in the York deckboard gate?
The 400 Series York gate uses 3/4" round black aluminum balusters that match the York infill style used in 400 Series York deckboard railing sections.
Are hinges, latch, and caps included with the gate kit?
No. The gate kit includes rails, uprights, balusters, and screws. Upright caps, hinges, latch, and any cross-brace hardware are purchased separately so you can select the hardware that best suits your project.
Can these gates be trimmed to fit my exact opening?
In many cases, the rails can be trimmed slightly to adjust the gate width, provided you maintain the manufacturer’s minimum rail engagement into the uprights. Always follow Superior’s current installation instructions when trimming.
Are 400 Series York deckboard gates code compliant for deck and porch guards?
The gates are based on the same 400 Series components used in guardrail sections that are engineered and third-party tested to IBC/IRC guard requirements when installed per current specifications. Always confirm final gate layout, latch height, and opening size with your local building authority.
Comparison
| Option | Key Strengths | Best Fit |
| 400 Series York Deckboard Gate (this product) | Deckboard-ready top rail with York 3/4" round aluminum balusters; matches 400 Series York deckboard level and stair sections. | Decks and porches using 400 Series York deckboard railing where you want a coordinated drink-rail gate. |
| 400 Series Model Deckboard Gate | Same 400 Series deckboard-ready rail profile with Model square balusters instead of round. | Projects that prefer a more traditional square-baluster appearance with a deckboard-top gate. |
| 200 Series York Gate | Uses York round balusters with a flat vinyl top rail but no deckboard receiver; simpler profile and lower material cost. | Porch and deck gates where a drink rail isn’t needed and a non-deckboard system is acceptable. |
To complete your 400 Series York deckboard railing project, pair these gates with matching 400 Series York level and stair sections, compatible posts, post mounts, caps, and trim. If you’d like help planning a complete materials list, comparing York to other 400 Series infills, or confirming what’s required to meet your local code, please contact us.
