Product Description
1-3/8″ Galvanized Kennel Hinge — Slides Into Gate Upright; Bolts to 1-3/8″ Frame
- Gap-Minimizing Design — Male end slides into a 1-3/8″ gate upright and the strap bolts to a 1-3/8″ kennel frame to reduce escape gaps
- No Female Hinge Needed — Purpose-built kennel hinge eliminates the standard female hinge for a tighter fit
- Fast, Clean Install — Strap secures with 3/8″ × 2″ carriage bolts (not included)
- Galvanized Steel — Durable, corrosion-resistant construction for long outdoor service
- Kennel-Ready — Use two hinges per gate (top & bottom) for smooth, reliable swing
Built specifically for kennel gates, this specialty hinge minimizes the space between the gate leaf and the frame so animals can’t squeeze through. The male insert seats inside a 1-3/8″ gate upright while the strap bolts around a 1-3/8″ frame upright—creating a tight, sturdy pivot without a separate female hinge. Install with 3/8″ × 2″ carriage bolts and pair with a kennel latch for a secure, pet-safe entry.
Why Choose This
- Pet-safe spacing — Tight geometry helps reduce snag and escape points at the hinge side
- Installer-friendly — Simple bolt-on strap plus slide-in male insert speeds fabrication
- Durable finish — Galvanized steel stands up to daily wash-downs and weather
- Standard sizing — Precisely fits 1-3/8″ kennel gate and frame tubing
Specifications
| Type | Kennel hinge (strap + male insert) |
| Gate Upright Size (O.D.) | 1-3/8″ (male end slides inside) |
| Frame Upright Size (O.D.) | 1-3/8″ (strap bolts around) |
| Material / Finish | Galvanized steel / Silver |
| Hardware (Required) | 3/8″ × 2″ carriage bolts & nuts (not included) |
| Sold As | Each (use two per gate) |
| Typical Usage | Dog kennels & panel gates using 1-3/8″ tubing |
Installation
Position the strap around the 1-3/8″ frame upright and loosely install 3/8″ × 2″ carriage bolts. Slide the male end fully into the 1-3/8″ gate upright and align for proper reveal. Tighten hardware, then repeat for the second (top/bottom) hinge. Test swing and latch engagement; re-square if needed. Pair with a kennel latch for a secure close.
Buying Guide
- Why kennel hinges? They remove the separate female hinge and bring the gate leaf closer to the frame—ideal for pet containment.
- Count per gate: Use two per leaf (top & bottom). Large/heavy gates may benefit from a third hinge.
- Hardware note: 3/8″ × 2″ carriage bolts are typically used (not included); verify length for your frame thickness.
- Pairing: Works great with a 1-3/8″ kennel latch and 1-3/8″ panel clamps for adjoining panels.
Frequently Asked Questions
- Does this require a female hinge?
- No. The male insert slides into the gate upright, so no separate female hinge is needed.
- What sizes does it fit?
- 1-3/8″ O.D. gate upright and 1-3/8″ O.D. frame upright.
- Is mounting hardware included?
- No. Use 3/8″ × 2″ carriage bolts and nuts (typical) to attach the strap.
- How many are needed per gate?
- Two per gate leaf (top and bottom).
- Will this reduce gaps compared to standard hinges?
- Yes. Kennel hinges are designed to minimize the gap between the frame and gate, helping prevent animal escapes.
Comparison
| Option | Strengths | Considerations | Best For |
|---|---|---|---|
| 1-3/8″ Kennel Hinge (this item) | Minimal gap; no female hinge; fast bolt-on install | 1-3/8″ tubing only; hardware not included | Dog kennels and panel gates with 1-3/8″ frames |
| Standard Strap Hinges (male + female) | Widely available; familiar setup | Larger frame-to-gate gap; more parts | General chain link walk/drive gates |
| Gravity/Self-Closing Hinges | Automatic return to closed; low maintenance | Less gap control; setup sensitive to grade | Pedestrian gates needing self-close |
| Butt/Bulldog/Box Hinges | Rigid, durable hinge families | Different brackets; may require adapters | Heavier frames or specialty layouts |
Need help laying out a kennel gate or pairing hinges with a latch? Contact us and we’ll help you pick the right combination.
