Product Description
Aluminum Tie Wires for Chain Link — 100 per Bag (Professional Grade)
- Fast, Secure Attachment — Pre-cut aluminum ties wrap fabric to line posts and rails for a clean, uniform install
- Fence-Contractor Grade — Non-rusting aluminum chosen by professionals for dependable outdoor performance
- Easy to Twist — Work-hardening aluminum grips tight without excessive effort, reducing install time
- Sized for Common Framework — Options for 1-5/8″, 2″, 2-1/2″, 3″, and 4″ posts/rails in 9 ga or 6 ga
- Neat Finish — Low-profile tie ends minimize snags on screens and slats when properly tucked
These aluminum tie wires are a jobsite staple for fastening chain link fabric to line posts and top/mid rails. Aluminum won’t rust and twists cleanly for a professional finish. For bottom edges and accessories, many crews also use hog ring pliers with 9 ga aluminum hog rings to speed attachment along tension wire and mesh overlaps.
Why Choose This
- Professional results — Consistent, secure wraps that hold fabric alignment
- Corrosion resistant — Aluminum stands up to weather without red rust
- Installer-friendly — Pre-cut, size-specific lengths make counting and spacing straightforward
Specifications
| Tie Wire Size (Post O.D. × Gauge) | Tie Length (each) | Approx. Bag Weight (100 pcs) |
| 1-5/8″ × 9 ga | 6″ | 1.20 lb |
| 2″ × 9 ga | 6-1/2″ | 1.30 lb |
| 2-1/2″ × 9 ga | 8-1/4″ | 1.60 lb |
| 3″ × 9 ga | 9-1/2″ | 1.85 lb |
| 1-5/8″ × 6 ga | 6″ | 1.40 lb |
| 2″ × 6 ga | 6-1/2″ | 1.50 lb |
| 2-1/2″ × 6 ga | 8-1/4″ | 1.60 lb |
| 3″ × 6 ga | 9-1/2″ | 1.85 lb |
| 4″ × 6 ga | 12-1/2″ | 2.00 lb |
| Material / Finish | Aluminum / Silver | |
| Package Quantity | 100 ties per bag | |
| Typical Spacing | Line posts: ~24″ on center • Top/mid rails: ~12–18″ on center (adjust for wind screens) | |
| Typical Usage | Securing fabric to line posts, top/mid rails, and gate/kennel panel frames | |
Installation
Hook one end of the tie around the rail or post, pass the free end through a fabric diamond, and twist the tails together 3–5 turns until snug. Keep all twists on the inside of the fence and tuck cut ends to avoid snags. Space ties at roughly 24″ on line posts and 12–18″ on rails; add ties near gates, corners, and wherever wind loads are higher.
Buying Guide
- Choose by framework O.D. and gauge: 9 ga is common for residential; 6 ga for heavier commercial/industrial use.
- Top rail note: Order 1-5/8″ ties for both 1-3/8″ and 1-5/8″ top rails (fits both).
- Speed up attachments: Use hog ring pliers with aluminum hog rings along bottom tension wire and at fabric overlaps.
Frequently Asked Questions
- How many ties do I need?
- Estimate using spacing (about 24″ on line posts and 12–18″ on rails) and your fence length. Add extras for gates, corners, and high-wind areas.
- Will aluminum ties corrode?
- Aluminum resists red rust and performs well outdoors. As with any metal, avoid dissimilar-metal contact in highly corrosive environments.
- Can I use these on vinyl-coated fabric?
- Yes. Aluminum ties are commonly used on galvanized and color-coated fabrics; twist snugly without over-tightening to avoid scuffing.
- What size should I pick for top rail?
- Use 1-5/8″ ties for both 1-3/8″ and 1-5/8″ top rails.
- Do these work on gates and kennel panels?
- Yes. They’re frequently used to attach fabric to gate uprights and portable/kennel panel frames.
Comparison
| Option | Strengths | Considerations | Best For |
|---|---|---|---|
| Aluminum Tie Wires (this item) | Non-rusting; easy to twist; clean finish | Softer metal can mar if over-torqued | General residential/commercial installs |
| Galvanized Steel Tie Wires | Higher abrasion resistance | Can rust if coating is damaged | High-traffic or rough-use areas |
| Hog Rings + Pliers | Very fast along tension wire/overlaps | Requires tool; not ideal for all points | Bottom tension wire and long runs |
Not sure which tie size or gauge best fits your framework? Contact us and we’ll help you choose a fence-contractor-grade solution that looks clean and lasts.
