Product Description
Catalyst Madison 5" x 5" Select Woodgrain Posts — Routed for Element Reserve Rails (108" Length)
- Purpose-built for Madison Select Smooth Woodgrain horizontal privacy panels.
- Routed for Element Reserve — Post pockets align with the 1.75" x 7" Element Reserve rails used on Madison panels.
- 108" standard length — Sized for 6' Madison panels with proper in-ground embedment when installed to spec.
- Woodgrain coordination — Available in Coastal Cedar and Cypress to match Select Smooth Woodgrain finishes.
- Low-maintenance vinyl — Durable, UV-stabilized construction for long-term outdoor performance.
Catalyst Madison 5" x 5" Select Woodgrain Posts anchor your horizontal privacy runs with a clean, factory-routed solution that accepts the Element Reserve 1.75" x 7" rails used throughout the Madison system. Each post measures 108" long for typical 6' high sections and is offered in Coastal Cedar and Cypress to coordinate with Madison Select Smooth Woodgrain panels. Choose the correct post type (line, corner, or end/gate) for your layout, and pair with color-matched caps like the Select Woodgrain Pyramid Cap or Select Woodgrain New England Cap to finish the look. For gate openings, consider adding 5" x 5" gate post inserts to increase stiffness and hardware bite.
Why Choose This
- Perfect fit for Madison — Factory routing ensures Element Reserve rails seat securely and align cleanly.
- Consistent visual match — Coastal Cedar and Cypress tones align with Madison Select Smooth Woodgrain panels.
- Installer-friendly — Standard 108" length simplifies ordering and reduces on-site cutting for 6' panels.
- Flexible post types — Line, corner, and end/gate options handle straight runs, turns, and openings.
Specifications
| Product | Catalyst Madison 5" x 5" Select Woodgrain Posts |
| Fence System Compatibility | Madison Select Smooth Woodgrain Horizontal Privacy Panels |
| Post Profile | 5" x 5" vinyl, factory-routed rail pockets |
| Rail Compatibility | Routed to accept Element Reserve rails (approx. 1.75" x 7") |
| Length | 108" (nominal), for 6' Madison panel installations with in-ground embedment |
| Post Types | Line, Corner, End/Gate (varies by layout) |
| Colors (Select Smooth Woodgrain) | Coastal Cedar, Cypress |
| Compatible Caps | 5" x 5" Select Woodgrain Pyramid or New England caps (sold separately) |
| Material | Fence-grade vinyl with UV inhibitors |
| Maintenance | No painting or staining; clean with mild soap & water |
| Warranty | Limited lifetime residential (per manufacturer) |
Installation (Quick Steps)
- Plan your centers — Lay out 6' or 8' panel widths and mark post locations; confirm gate openings early.
- Set posts in concrete — Excavate to local frost/wind requirements; plumb posts and keep tops aligned.
- Orient routing — Face routed pockets toward the run so Element Reserve rails seat into the posts.
- Allow cure — Let concrete set fully before loading rails and boards.
- Finish details — Install rails/infill per panel instructions; add color-matched 5" x 5" caps and reinforce gate posts as needed.
Buying Guide
- Match the system — These posts are intended for Madison Select Smooth Woodgrain (Horizontal) with Element Reserve rails.
- Order by post type — Tally line, corner, and end/gate posts from your site sketch; add spares for cuts or layout changes.
- Plan for gates — Use end/gate posts at openings and consider 5" x 5" gate post inserts for added stiffness and hardware bite.
Frequently Asked Questions
- Are these posts only for Madison Select Smooth Woodgrain panels?
- Yes. They are routed to accept Element Reserve rails used by the Madison Select Smooth Woodgrain horizontal system.
- What post length do I need for 6' Madison panels?
- These posts are 108" long, sized for typical 6' installations with proper in-ground embedment when installed to specification.
- Which post types do I need for my layout?
- Use line posts between panels in straight runs, corner posts at direction changes, and end/gate posts at terminations and gate openings.
- Do post caps come with the posts?
- No. Caps are sold separately so you can choose the profile you prefer, such as the Select Woodgrain Pyramid or New England styles.
- Do I need reinforcement at gate posts?
- Reinforcement is recommended for gate posts. Add a 5" x 5" insert and select hinges/latches rated for your gate width and usage.
Comparison
| Option | Strengths | Considerations | Best For |
|---|---|---|---|
| Madison 5" x 5" Select Woodgrain Posts (this item) | Factory-routed for Element Reserve; Select woodgrain color match; standard 108" length. | Routing specific to Madison/Element Reserve—use posts matched to other systems as needed. | Horizontal Madison Select Smooth Woodgrain projects at 6' height. |
| Newbury Select Woodgrain Posts | Routed for Newbury vertical systems; coordinates with Newbury Select Smooth Woodgrain panels. | Different routing/rail compatibility vs. Madison. | Vertical Select woodgrain installations. |
| Select Woodgrain Caps (accessory) | Finishes and protects 5" x 5" posts with matched colors. | Accessory item—order separately. | Completing the Madison Select system with cohesive details. |
Need a takeoff? Share your run lengths, corners, and gate sizes—we’ll help you count line, corner, and end/gate posts, reinforcement inserts, and matching caps for a clean, long-lasting Madison installation.
