Product Description
Catalyst Sedona Crossbuck 5" x 5" x 84" Vinyl Posts – Line, Corner & End/Gate
- System-matched Sedona posts — 5" x 5" x 84" vinyl posts routed specifically for Catalyst Sedona Crossbuck Ranch Rail fence sections.
- Pre-routed for crossbuck layout — Factory openings accept both the horizontal and diagonal 1-1/2" x 5-1/2" rails that create the Sedona crossbuck pattern.
- Sized for 4' high Sedona fence — 84" post length is designed for typical embedment and a 4' tall Sedona Crossbuck fence line.
- Three functional post types — Choose line, corner, or end/gate posts to handle straight runs, turns, and terminations or gate openings.
- Durable, low-maintenance vinyl — Heavy-duty vinyl construction resists rot, rust, and insect damage and never needs painting or staining.
- Bright white finish — Clean white color matches Sedona Crossbuck rails and gates for a cohesive ranch-rail appearance.
- Professional grade for ranch and equestrian use — Engineered for agricultural, horse, and large-property fencing where strength and longevity matter.
Catalyst Sedona Crossbuck 5" x 5" x 84" Vinyl Posts are the structural backbone of the Sedona Crossbuck Ranch Rail fence system. These heavy-duty posts are pre-routed to accept the 1-1/2" x 5-1/2" horizontal and diagonal rails that form Sedona’s distinctive crossbuck pattern, allowing for fast, clean, and professional installation. At 84" long, they are sized for typical in-ground installation with a 4' finished fence height, making them ideal for ranch, equestrian, and large residential or commercial perimeters. Available as line, corner, and end/gate posts in a bright white finish, Sedona posts create a unified, low-maintenance framework for your crossbuck fence.
Why Choose These Posts
- Purpose-built for Sedona Crossbuck — Routing and dimensions are specifically engineered for the Sedona Crossbuck Ranch Rail configuration.
- Clean, professional connections — Matching openings for both horizontal and diagonal rails keep the crossbuck pattern consistent from post to post.
- Reliable support for long runs — 5" x 5" vinyl posts are well-suited for long fence lines on farms, ranches, and large estates.
- Consistent look across the system — Posts, rails, and gates share the same white finish and profiles so the entire fence reads as one coordinated design.
- Low upkeep over time — Vinyl posts avoid warping, splitting, and peeling and clean up easily with basic soap and water.
- Backed by a limited lifetime warranty — Part of the Catalyst vinyl family, covered under a transferable limited lifetime fence warranty.
Specifications
| Attribute | Details |
|---|---|
| Brand / Collection | Catalyst Fence Solutions – Sedona Crossbuck Ranch Rail |
| Post Dimensions | 5" x 5" square profile |
| Post Length | 84" |
| Intended Fence Height | 4' Sedona Crossbuck Ranch Rail fence |
| Routing | Pre-routed to accept 1-1/2" x 5-1/2" horizontal and diagonal Sedona Crossbuck rails |
| Available Post Types | Line, Corner, End / Gate |
| Color | White |
| Material | Vinyl (PVC) |
| Compatible Rails | 1-1/2" x 5-1/2" x 8' Sedona Crossbuck Ranch Rails |
| Compatible Gates | Sedona Ranch Rail Gates (matching crossbuck style) |
| Post Caps | 5" x 5" vinyl post caps (sold separately) |
Post Type Guide
| Post Type | Typical Use |
|---|---|
| Line Post | Used in straight runs of Sedona Crossbuck fencing where rails continue in a single line between sections. |
| Corner Post | Used where the Sedona fence changes direction (inside or outside corners) while maintaining the crossbuck pattern on both sides. |
| End / Gate Post | Used where the fence terminates or where a Sedona ranch rail gate is installed, providing support at the end of a run or gate opening. |
Installation
Lay out your Sedona Crossbuck fence line and mark locations for line, corner, and end/gate posts based on 8' rail spacing and planned gate openings. Call your local utility-marking service before digging. Dig post holes to the depth specified by local codes and soil conditions, then set each 5" x 5" x 84" post in concrete, aligning and plumbing it carefully so the pre-routed openings line up for the crossbuck pattern. Once the concrete has cured, slide the 1-1/2" x 5-1/2" horizontal and diagonal rails into the routed openings according to the manufacturer’s Sedona Crossbuck layout, maintaining level, even rail lines between posts. Finish by installing 5" x 5" post caps and any Sedona ranch rail gates using the designated end/gate posts.
Buying Guide
- Match posts to Sedona only — These routed posts are specifically designed for Sedona Crossbuck Ranch Rail; other Catalyst ranch rail styles (like Coronado) use different routing patterns.
- Estimate quantities by layout — Count line posts between sections, corner posts wherever the fence changes direction, and end/gate posts at terminations and gate openings.
- Pair with the correct rails — Use only the 1-1/2" x 5-1/2" x 8' ranch rails specified for Sedona Crossbuck to ensure the horizontal and diagonal members fit the routed openings.
- Plan for gates early — Decide where Sedona ranch rail gates will go so you can position end/gate posts and order any required gate stiffeners and hardware at the same time.
- Choose compatible caps — Finish posts with 5" x 5" caps that match other Catalyst vinyl components on the property.
- Review warranty and care — For coverage terms and maintenance guidance, review the Catalyst Vinyl Fence Warranty.
Frequently Asked Questions
What size are the Sedona Crossbuck posts?
Sedona Crossbuck posts are 5" x 5" square and 84" long, sized for typical installation with a 4' high Sedona Crossbuck Ranch Rail fence.
How are these posts routed?
The posts are factory pre-routed to accept the 1-1/2" x 5-1/2" rails used in the Sedona Crossbuck system, including openings for both the horizontal and diagonal members.
What post types are available?
Sedona Crossbuck posts are available as line posts for straight runs, corner posts for direction changes, and end/gate posts for terminations and gate openings.
What color are the posts?
These Sedona posts are supplied in a bright white finish to match Sedona Crossbuck rails and gates.
Do the posts include caps or hardware?
No. This listing is for the vinyl posts only. 5" x 5" post caps, rails, gates, and any gate hardware or stiffeners must be ordered separately.
Are these posts suitable for horse and livestock fencing?
Yes. When used as part of the complete Sedona Crossbuck Ranch Rail fence system, these heavy-duty vinyl posts are commonly installed on agricultural, equestrian, and large residential or commercial properties. Always follow the manufacturer’s installation guidelines for best performance.
Comparison
| Option | Key Strengths | Best Fit |
|---|---|---|
| Sedona Crossbuck 5" x 5" x 84" Posts (this product) | Pre-routed for Sedona Crossbuck horizontal and diagonal rails; sized for 4' high crossbuck ranch rail fences; available as line, corner, and end/gate posts. | New Sedona Crossbuck fence lines or repairs where you need system-specific posts that preserve the crossbuck pattern. |
| Coronado Ranch Rail Posts | Routed for straight 2-, 3-, or 4-rail Coronado layouts without crossbuck diagonals. | Traditional ranch rail projects where you want open horizontal rails instead of a crossbuck design. |
| Blank 5" x 5" Posts | Unrouted posts used for transitions, standalone columns, or custom routing when required. | Special situations in a broader fence plan where routed Sedona posts are not needed, such as decorative ends or sign posts. |
To complete your Sedona Crossbuck system, pair these 5" x 5" x 84" posts with matching Sedona rails, gates, post caps, and any required stiffeners or hardware. If you’d like help planning post counts, choosing post types, or building a full material list for your project, please contact us.
