Chain Link Rolling Gate Hardware Kits, Galvanized - Residential & Commercial

Product Description

Chain Link Rolling Gate Hardware Kits — Galvanized (Residential & Commercial)

• Complete kits — Includes double wheel carrier, wheels, rear rollers/brackets, rollo latch, and universal track brackets.
• Two duty levels — Residential kit with 6" wheels; Commercial kit with 8" wheels.
• Universal track brackets — Fit common posts (typically 2-1/2" or 3") and 1-5/8" track.
• Galvanized steel — Pressed/galvanized components for long outdoor service.

When a swing gate won’t fit the site, these rolling kits give you what you need to build a smooth-sliding chain-link gate that tracks straight. For frame corners, extra clamps, or replacement wheels, browse Chain Link Gate Hardware. If you’re also upgrading posts or rails, see our Residential Framework or Commercial Framework to match duty level.

Why Choose This

• All-in-one convenience — Core rolling components in one box.
• Right-size performance — Pick 6" (residential) or 8" (commercial) wheels to suit gate width/weight.
• Installer-friendly — Universal brackets ease alignment on typical 2-1/2" or 3" posts.

Specifications

Installation (Quick Steps)

• Assemble the gate frame square; attach the double wheel carrier to the front of the frame.
• Mount universal track brackets to latch/track posts; insert 1-5/8" track and set straight/level.
• Install rear rollers & brackets on the gate tail; set rollo latch on the latch post; test glide and adjust.

Buying Guide

• Duty level — Choose Residential (6" wheels) for lighter gates; Commercial (8" wheels) for wider/heavier frames.
• Post sizes — Verify latch/track posts are 2-1/2" or 3" if you’re using the universal brackets included.
• Track alignment — Use six brackets (top/bottom at each post) to keep the track straight over long runs.
• Spare parts — Stock extra wheels/brackets from Gate Hardware for fast repairs.
• Framework match — Pair with Residential or Commercial rails/posts to match load and finish.

Frequently Asked Questions

What components are included in the Chain Link Rolling Gate Hardware Kits?

Each kit includes a double wheel carrier, two wheels, two rear steel rollers with brackets, a rollo latch, and six universal track brackets designed for use with 1-5/8" track.

Which kit should I choose for my sliding chain link gate?

Select the Residential kit with 6" wheels for lighter gates and shorter openings, or the Commercial kit with 8" wheels and a wider carrier for heavier/wider gates.

Will the universal track brackets fit my existing chain link posts?

Universal track brackets are commonly sized to mount on 2-1/2" or 3" posts and accept 1-5/8" track. Confirm your post outside diameter before installation.

Comparison

• Rolling Gate Hardware Kits (this item) — Complete, galvanized hardware set to build a sliding chain link gate for tight-clearance sites.
• Walk Gate Hardware Kit (Galvanized) — Hinged pedestrian entry when swing space is available and sliding is not required.
• Individual Rolling Components — Mix-and-match wheel carriers, brackets, and latches for custom builds or replacements.