Product Description
Color Chain Link Rail End Caps — 1-3/8″ Aluminum (No-Hole) & 1-5/8″ Pressed-Steel Combo (Truss Hole)
- Two Purpose-Built Options — 1-3/8″ aluminum rail end (no truss hole) and 1-5/8″ pressed-steel combo rail end with a truss-rod hole
- Color-Coated to Blend — Powder-coated in Black, Brown, and Green to blend with common color chain link fabric, framework, and fittings (exact matches not guaranteed)
- Clean Rail Terminations — Cup-and-ear fitting captures the rail and bolts to terminal, corner, or gate posts
- Standard Hardware — Connects with a brace band + 5/16″ × 1-1/4″ carriage bolt on the post (sold separately)
- Versatile Placement — Use for top rail, mid rail, or bottom/brace rail terminations
Finish your color chain link rails with powder-coated rail end caps that are designed to blend with typical Black, Brown, and Green systems. Choose the 1-3/8″ aluminum rail end for standard residential rails without truss bracing, or step up to the 1-5/8″ pressed-steel combo rail end when you need a truss-rod hole for brace-and-truss assemblies on heavier commercial runs. Because manufacturer formulas and weathering vary, do not expect a perfect color match—always verify appearance on site.
Why Choose This
- Right part for the job — No-hole aluminum for simple terminations; steel combo with truss-rod hole for braced sections
- Durable finishes — Powder over aluminum or galvanized steel for outdoor use
- Installer-friendly — Uses the brace bands and carriage bolts you already stock
- System continuity — Colors intended to blend with common fabric, framework, and fittings
Specifications
| Rail End Size (Rail O.D.) | 1-3/8″ | 1-5/8″ Combo |
| Fits Rail (Actual O.D.) | 1-3/8″ round rail | 1-5/8″ round rail |
| Truss-Rod Hole | No | Yes — combo style |
| Material | Powder-coated aluminum | Powder-coated pressed steel |
| Finish Colors | Black, Brown, Green (blend intent; exact match not guaranteed) | |
| Approx. Weight (each) | 0.20 lb | 0.35 lb |
| Post Connection | Via brace band around the post + 5/16″ × 1-1/4″ carriage bolt & nut through the ear (sold separately) | |
| Typical Usage | Residential chain link rail terminations | Commercial chain link with brace & truss |
| Included Hardware | None — order brace bands and bolts separately | |
Installation
Slide the round rail fully into the cup. Place a brace band around the terminal/corner/gate post at rail height and align its square hole with the rail end ear. Insert a 5/16″ × 1-1/4″ carriage bolt from the band side through the ear, add the nut, and tighten until snug while keeping the rail level. For combo ends, route the truss rod through the hole and tension per standard brace-and-truss practice.
Buying Guide
- Pick the size: Match the rail end to your rail O.D. — 1-3/8″ (aluminum, no-hole) or 1-5/8″ (steel, combo with truss-hole).
- Need bracing? Choose the combo style (1-5/8″) when you’re installing a brace-and-truss.
- Color expectations: Black/Brown/Green coatings are intended to blend with most color systems; aging and brand differences mean exact matches aren’t guaranteed.
- Line-post runs: To let rails continue past a line post, use a line rail (boulevard) clamp instead of a rail end.
Frequently Asked Questions
- What’s the difference between the two options?
- The 1-3/8″ is an aluminum rail end with no truss-rod hole; the 1-5/8″ is a pressed-steel combo rail end with a truss-rod hole for brace systems.
- Will these exactly match my fence color?
- No. They’re formulated to blend with common Black, Brown, and Green systems. Always verify appearance on site.
- What hardware do I need?
- A brace band sized to your post O.D. and a 5/16″ × 1-1/4″ carriage bolt & nut for the ear connection (sold separately).
- Can I use these for bottom/brace rails?
- Yes—rail ends are used to terminate top, mid, and bottom/brace rails at terminal, corner, and gate posts.
- Do rail ends include bands and bolts?
- No. Order brace bands and carriage bolts separately to match your post size and band width.
Comparison
| Option | Strengths | Considerations | Best For |
|---|---|---|---|
| Color Rail End Caps (this item) | Blend with color systems; 1-3/8″ no-hole (aluminum) or 1-5/8″ combo (steel, truss-hole) | Exact color match not guaranteed | Residential (1-3/8″) and commercial braced sections (1-5/8″) |
| Galvanized Rail End (No-Hole) | Economical; silver galvanized | Not color-coated | Standard galvanized systems |
| Galvanized Combo Rail End | Truss-rod hole for brace systems | Silver finish; not color-coated | Braced terminals/corners/gates |
| Heavy Aluminum Rail End | Rust-proof; silver finish | No truss-rod hole | Coastal/high-corrosion, non-trussed sections |
Not sure which size or style you need? Contact us and we’ll help you dial in the right rail ends, bands, and bolts.
