Product Description
DAC Stealth Cantilever Roller Gate Stop — Protects Rollers & Covers
- Purpose-built protection — Galvanized steel stop designed specifically for Stealth cantilever roller systems.
- Installs with roller hardware — Mounts using the cantilever roller’s existing U-bolts; no extra brackets required.
- Prevents impact damage — Stops the gate from striking the carrier, protecting the roller and optional cover.
- Works on new or existing gates — Ideal for both manual and automated cantilever installations.
- Best practice — Use one stop at the leading carrier and one at the trailing carrier per leaf.
The Stealth Cantilever Roller Gate Stop is a simple, heavy-duty safeguard that saves rollers, covers, and frames from costly impact damage. It attaches directly to the cantilever carrier using the carrier’s own U-bolts, so you don’t need to drill the post or fabricate extra brackets. Once positioned, the stop provides a positive contact point that prevents the moving leaf from over-running into the roller body. That helps maintain alignment and eliminates the cracked covers and bent members you often see on high-cycle sites. Whether your system is hand-operated or operator-driven, adding stops is an easy win for longevity and serviceability.
This part is compatible across the Stealth cantilever roller family, so you can standardize it on square-post and round-post installations alike. If you’re building out a complete system, choose your carriers first—use the Stealth Square Cantilever Gate Roller for 2" square frames with square/round post options, or the Stealth Round Cantilever Gate Roller for round posts—and then add two gate stops per leaf. Because the stop mounts with the carrier’s hardware, installation is fast and consistent from job to job. The galvanized finish stands up to weather and wash-downs, making it a smart add for commercial entrances and service yards. Plan one stop at the leading carrier and one at the trailing carrier to cushion both ends of travel.
Specifications
| Product | Stealth Cantilever Roller Gate Stop |
| Material / Finish | Galvanized steel |
| Mounting | Attaches with existing Stealth carrier U-bolts (no extra brackets required) |
| System Compatibility | Works with Stealth cantilever rollers (square- and round-post carriers) |
| Recommended Quantity | Two per gate leaf (one leading, one trailing) |
Installation (Quick Steps)
- Prep — With the leaf supported, loosen the Stealth carrier U-bolts at the target location.
- Position — Slide the gate stop under the U-bolts; orient so the stop contacts the frame before the wheel body.
- Snug & test — Lightly tighten, roll the leaf through both travel limits, and confirm clear stop contact.
- Tighten — Torque the U-bolts evenly; repeat at the opposite carrier (leading or trailing) as required.
Buying Guide
- Build your system — Choose your carriers first (Stealth Square or Stealth Round), then add two stops per leaf.
- Protect covers — Stops help prevent cracked Stealth roller covers and damage to the carrier housing.
- Service tip — After initial run-in, retorque hardware and re-check stop contact at both ends of travel.
Frequently Asked Questions
- Do I need one or two gate stops?
- Plan for two per leaf—one at the leading carrier and one at the trailing carrier—to protect both ends of travel.
- Will it fit my Stealth carriers?
- Yes. The stop is designed to work with the Stealth cantilever roller family and mounts using the carrier’s U-bolts.
- Is this only for automated gates?
- No. It’s suitable for manual and operator-driven cantilever gates; the stop helps prevent over-travel impacts in either case.
Comparison
- Stealth Gate Stop (this product) — Galvanized stop that mounts with carrier U-bolts; helps prevent carrier/cover/frame impact.
- Stealth Square Cantilever Rollers — Carriers for 2" square frames; pair with two stops per leaf for full protection.
- Stealth Round Cantilever Rollers — Carriers for round posts; use the same gate stops to protect the carriers at both ends of travel.
