Product Description
Rollo Latch for Rolling Chain Link Gates — Galvanized, Fits 1-5/8″ & 2″ Gate Frames
- Purpose-Built for Rolling/Sliding Gates — Captures the gate frame at the latch post for a positive, repeatable close
- Padlockable Security — Add a padlock to secure the latch (padlock not included)
- Simple, Field-Proven Design — Two-piece latch mounts with standard brace bands and carriage bolts
- Galvanized Steel — Tough, corrosion-resistant construction for outdoor service
- Two Frame Sizes — Fits 1-5/8″ O.D. or 2″ O.D. gate uprights
This galvanized rollo latch (a.k.a. rolo latch) is a staple on manual rolling/sliding chain link gates. The receiver mounts to the latch post with two brace bands while the latch pin assembly bolts to the gate frame; when closed, the pin drops into the receiver and can be padlocked. It’s a rugged, low-maintenance way to secure heavy residential or commercial rolling gates.
Why Choose This
- Reliable close — Guides and captures the frame consistently at the post
- Security-ready — Padlock hole accepts standard padlocks for jobsite or yard protection
- Installer-friendly — Uses common chain link fittings (brace bands + carriage bolts)
- Heavy-duty build — Galvanized steel stands up to weather and daily use
Specifications
| Gate Frame Size (O.D.) | 1-5/8″ | 2″ |
| Receiver Mount | Attaches to latch post with (2) brace bands + (2) carriage bolts (select sizes to match post O.D.) | |
| Material / Finish | Galvanized steel / Silver | |
| Lockable | Yes (padlock not included) | |
| Weight (approx.) | 1.5 lb | |
| Included Hardware | Latch only — brace bands, bolts, nuts sold separately | |
| Typical Usage | Manual rolling/sliding chain link gates (residential & commercial) | |
Installation
Mount the receiver to the latch post using two correctly sized brace bands and carriage bolts. Attach the latch pin assembly to the gate frame upright that meets the post when closed. Roll the gate shut and verify the pin drops cleanly into the receiver; adjust hardware alignment as needed, then add a padlock if desired.
Buying Guide
- Match your frame: Choose the model that fits your gate upright (1-5/8″ or 2″ O.D.).
- Size the bands: Order brace bands and carriage bolts to match your latch post O.D. (e.g., 2-3/8″, 2-7/8″, etc.).
- Manual vs. operator: For operator-driven sliding/cantilever gates, many installs use a “V” receiver or operator-specific latch—follow your operator manufacturer’s guidance.
Frequently Asked Questions
- What mounts to the post and what mounts to the gate?
- The receiver mounts to the latch post with two brace bands; the latch pin assembly bolts to the gate frame.
- Can I lock it?
- Yes. The design accepts a padlock to secure the gate (padlock not included).
- Will it work on cantilever gates?
- For manual cantilever gates that close to a latch post, installers sometimes use a Rolo latch. However, most cantilever systems use a dedicated cantilever receiver/nesting latch (especially with operators). Choose the style that matches your gate design.
- Are brace bands and bolts included?
- No. Order two brace bands and two carriage bolts sized to your latch post.
- Which frame sizes does it fit?
- 1-5/8″ or 2″ O.D. chain link gate uprights.
Comparison
| Option | Strengths | Considerations | Best For |
|---|---|---|---|
| Rollo Latch (this item) | Simple; padlockable; uses common brace bands | Manual gates; requires precise alignment | Manual rolling/sliding chain link gates |
| “V” Receiver (operator setups) | Channels gate nose into receiver; common with operators | Typically not padlockable; follow operator spec | Operator-driven sliding/cantilever gates |
| Fork/Butterfly Latch (swing gates) | Auto-latching for hinged walk gates | Not for rolling/sliding gates | Hinged (swing) chain link gates |
Not sure which latch fits your gate and post sizes? Contact us and we’ll help you choose the right components.
