Product Description
Wood-to-Metal End Post Adapter — Galvanized (Professional Grade)
- Join Wood Rails to a Round Metal End Post — Creates a rigid end connection between wood fence rails and a round steel post
- Fence-Contractor Grade — Heavy, galvanized steel bracket chosen by professionals for long outdoor service
- Straight, Clean Terminations — Keeps rails aligned at the end of the run for a finished look
- Flexible Framing — Works with typical 2×4 wood rails; fasten with screws or carriage bolts
- Retrofit-Friendly — Ideal when reusing an existing chain link end post for a new or hybrid wood fence
Terminate wood rails cleanly on a round steel post with this galvanized wood-to-metal end post adapter. The flat, pre-drilled plate provides a sturdy bearing surface so rails fasten square at the end of the line. Match your fasteners to the job (exterior screws or carriage bolts for the rails; U-bolts/anchors/through-bolts for the post). For matching 90° corners, see our wood-to-metal corner post adapter. Need hardware? Browse bolts & fasteners.
Why Choose This
- Professional-grade termination — Holds rails square and resists racking at end conditions
- Galvanized protection — Zinc finish stands up to weather and jobsite handling
- Installer-friendly — Straightforward hole pattern for common screw/bolt layouts
Specifications
| Adapter Type | End-post bracket for wood rails to round steel post |
| Fits Post O.D. (Options) | 1-7/8″ (2″) • 2-3/8″ (2-1/2″) • 2-7/8″ (3″) |
| Wood Rail Compatibility | Nominal 2×4 rails (approx. 1-1/2″ × 3-1/2″); two- or three-rail layouts |
| Material / Finish | Pressed/heavy-gauge steel, galvanized (silver) |
| Mounting to Post | U-bolts, anchors, or through-bolts (by installer) |
| Mounting to Wood | Exterior wood screws or carriage bolts (by installer) |
| Included | End post adapter bracket only (no fasteners) |
| Typical Usage | Hybrid fences using a steel end post with wood rails; retrofit on existing chain link ends |
Installation
Plumb and set the steel end post. Dry-fit the adapter at rail height so the plate centers on the rail ends; mark holes. Attach the adapter to the post with suitable U-bolts/anchors or through-bolts. Pre-drill rails and fasten to the plate using exterior screws or carriage bolts. Check rail line and level, then tighten all hardware. Seal field-cut wood ends for longest service life.
Buying Guide
- Size by post O.D.: Choose the adapter to match the outside diameter of your round end post (1-7/8″, 2-3/8″, or 2-7/8″).
- Rail layout: Confirm the plate’s hole spacing suits your two- or three-rail pattern.
- System match: Use this for ends; pair with the corner adapter where the fence changes direction.
Frequently Asked Questions
- Does it include fasteners?
- No. Select fasteners based on your post material and rail thickness.
- Will it work with 2×6 rails?
- It’s designed around standard 2×4 rails. Wider members may require alternate hole placement or additional brackets.
- Can I use it on square metal posts?
- This model is sized for round O.D. posts. Use hardware designed for square posts if needed.
- Is the finish paintable?
- Yes. Scuff, clean, and use a primer/paint suitable for galvanized steel if a color finish is desired.
- What about composite or PVC rails?
- Many composites can be fastened similarly; follow the rail manufacturer’s fastening guidance.
Comparison
| Option | Strengths | Considerations | Best For |
|---|---|---|---|
| End Post Adapter (this item) | Rigid termination on round steel post | End-specific; not for corners | Hybrid wood-to-steel end conditions |
| Corner Post Adapter | Square 90° rail alignment at corners | Corner-specific | Direction changes on round steel posts |
| Traditional Wood End Post | All-wood aesthetics; simple fastening | Less durable than steel in some soils | Full wood-frame builds |
Need help matching adapter size to your post O.D. and rail layout? Contact us and we’ll help you build a fence-contractor-grade end condition that’s straight, strong, and built to last.
