|
1 3/8" Gate Clip
|
|
1 3/8 Female Hinge - Pressed Steel
|
|
1 5/8 Female Hinge - Pressed Steel
|
|
1 3/8 Female Hinge - Malleable Steel
|
|
Our Price: $0.36
|
|
|
|
Our Price: $0.91
|
|
|
|
Our Price: $1.13
|
|
|
|
Our Price: $1.16
|
|
|
|
|
|
|
|
Gate Clips are used to secure chain link wire (fabric) onto the framework. The large end of the gate clip slips over the frame, while the smaller end holds the tension bar in place, stretching the wire.
|
The 1 3/8" Pressed Steel Female Hinge is a galvanized chain link gate hinge that fits a 1 3/8" gate frame. Most commonly used on residential chain link gates.
This hinge requires a 3/8" carriage bolt (not included).
|
The 1 5/8" Pressed Steel Female Hinge is a galvanized chain link gate hinge that fits a 1 5/8" gate frame. Most commonly used on residential chain link gates.
This hinge requires a 3/8" carriage bolt (not included).
|
The 1 3/8" Malleable Steel Female Hinge is a galvanized chain link gate hinge that fits a 1 3/8" gate frame. Most commonly used on residential chain link gates.
Comes in 2 pieces w/ required bolts.
|
|
|
|
1 5/8 Female Hinge - Malleable Steel
|
|
2" Female Hinge - Pressed Steel
|
|
1 3/8" Pressed Steel Male Hinge
|
|
2" Pressed Steel Male Hinge
|
|
Our Price: $1.33
|
|
|
|
Our Price: $1.34
|
|
|
|
Our Price: $1.41
|
|
|
|
Our Price: $1.79
|
|
|
|
|
|
|
The 1 5/8" Malleable Steel, Female Hinge is a galvanized chain link gate hinge that fits a 1 5/8" gate frame. Most commonly used on residential chain link gates.
Comes in 2 pieces w/ required bolts.
|
The 2" Pressed Steel Female Hinge is a galvanized chain link gate hinge that fits a 2" gate frame. Most commonly used on residential chain link gates.
This hinge requires a 3/8" carriage bolt (not included).
|
1 3/8" Male U-Bolt Hinge is a residential grade gate hinge manufactured from galvanized pressed steel. It will fit a 1 3/8 chain link gate post.
|
2" Male U-Bolt Hinge is a residential grade gate hinge manufactured from galvanized pressed steel. It will fit a 2" chain link gate post.
|
|
|
|
1 5/8" Pressed Steel Male Hinge
|
|
5/8" x 4 1/2" Male Lag Screw
|
|
2" Male U-Bolt Hinge
|
|
5/8" x 4 1/2" Male J-Bolt
|
|
Our Price: $1.82
|
|
|
|
Our Price: $2.07
|
|
|
|
Our Price: $2.10
|
|
|
|
Our Price: $2.13
|
|
|
|
|
|
|
|
1 5/8" Male U-Bolt Hinge is a residential grade gate hinge manufactured from galvanized pressed steel. It will fit a 1 5/8 chain link gate post.
|
5/8" x 4 1/2" Male Lag Screw Hinge. Use for mounting residential and industrial gates to wood posts.
|
2" Male U-Bolt Hinge is a residential grade hinge manufactured from galvanized malleable steel. It will fit a 2 inch chain link post and the U-Bolt can be adjusted to create the perfect fit..
|
The 5/8" x 4 1/2" J-Bolt Male Gate Hinge is designed for mounting chain link gates to wood posts and other flat structures. The bolt has a male hinge end, similar to traditional male hinges, which makes it easy to hang chain link gates using a corresponding female hinge.
|
|
|
|
Male Hinge Wall Plate
|
|
1 3/8" Kennel Hinge
|
|
2 1/2" Male U-Bolt Hinge
|
|
2 1/2" Pressed Steel Male Hinge
|
|
Our Price: $2.17
|
|
|
|
Our Price: $2.30
|
|
|
|
Our Price: $2.31
|
|
|
|
Our Price: $2.31
|
|
|
|
|
|
|
|
The Male Hinge Mounting Plate is a galvanized steel plate used for mounting gates to walls, wood posts, or other flat surfaces. The plate has a protrusion that fits into a standard female hinge.
|
The 1 3/8" x 1 3/8" Kennel Hinge is designed for a dog kennel gate framework and post. The special design ensures that there is a minimal gap between the gate and kennel panel.
|
2 1/2" Male U-Bolt Hinge is a residential grade hinge manufactured from galvanized malleable steel. It will fit a 2 1/2 inch chain link post and the U-Bolt can be adjusted to create the perfect fit..
|
2 1/2" Male U-Bolt Hinge is a residential grade gate hinge manufactured from galvanized pressed steel. It will fit a 2 1/2" chain link gate post.
|
|
|
|
3" Male U-Bolt Hinge
|
|
3" Pressed Steel Male Hinge
|
|
5/8" x 6" Male J-Bolt
|
|
2" x 1 3/8" Strap Hinge
|
|
Our Price: $2.39
|
|
|
|
Our Price: $2.39
|
|
|
|
Our Price: $2.52
|
|
|
|
Our Price: $2.65
|
|
|
|
|
|
|
|
3" Male U-Bolt Hinge is a residential grade hinge manufactured from galvanized malleable steel. It will fit a 3" inch chain link post and the U-Bolt can be adjusted to create the perfect fit..
|
3" Male U-Bolt Hinge is a residential grade gate hinge manufactured from galvanized pressed steel. It will fit a 3" chain link gate post.
|
The 5/8" x 6" J-Bolt Male Gate Hinge is designed for mounting chain link gates to wood posts and other flat structures. The bolt has a male hinge end, similar to traditional male hinges, which makes it easy to hang chain link gates using a corresponding female hinge.
|
2" x 1 3/8" Strap Hinge for residential chain link gates.
|
|
|
|
5/8" x 6" Male Lag Screw
|
|
1 3/8" Kennel Latch
|
|
1 5/8" Hinge Bearing Plug
|
|
2 1/2" x 1 3/8" Strap Hinge
|
|
Our Price: $2.73
|
|
|
|
Our Price: $3.04
|
|
|
|
Our Price: $3.22
|
|
|
|
Our Price: $3.30
|
|
|
|
|
|
|
|
5/8" x 6" Male Lag Screw Hinge. Use for mounting residential and industrial gates to wood posts.
|
The 1 3/8" Kennel Latch is specially designed for use with dog kennels. The galvanized latch requires the operator to lift up and turn to open the gate; essentially making it dog proof.
|
The 1 5/8" Hinge Bearing Plug - designed to support an industrial chain link gate hinge.
|
2 1/2" x 1 3/8" Strap Hinge for residential chain link gates.
|
|
|
|
2" Hinge Bearing Plug
|
|
5/8" x 10" Male J-Bolt
|
|
5/8" x 12" Male J-Bolt
|
|
2 1/2" Pressed Steel Butt Hinge
|
|
Our Price: $3.39
|
|
|
|
Our Price: $3.98
|
|
|
|
Our Price: $4.48
|
|
|
|
Our Price: $6.97
|
|
|
|
|
|
|
|
The 2" Hinge Bearing Plug - designed to support an industrial chain link gate hinge.
|
The 5/8" x 10" J-Bolt Male Gate Hinge is designed for mounting chain link gates to walls and other flat structures. The bolt has a male hinge end, similar to traditional male hinges, which makes it easy to hang chain link gates using a corresponding female hinge.
|
The 5/8" x 12" J-Bolt Male Gate Hinge is designed for mounting chain link gates to walls and other flat structures. The bolt has a male hinge end, similar to traditional male hinges, which makes it easy to hang chain link gates using a corresponding female hinge.
|
2 1/2" Pressed Steel Butt Hinge - designed for use on industrial chain link gates. This galvanized hinge fits a 2 1/2" gate post and a 1 5/8" or 2" gate upright. The Butt Hinge enables a gate to swing 90 degrees either direction or 180 degrees with an adapter.
Industrial Butt Hinges are sold individually, not in pairs.
|
|
|
|
2 1/2 Bulldog Hinge
|
|
3" Pressed Steel Butt Hinge
|
|
3" Bulldog Hinge
|
|
2 1/2" Arm Hinge - Malleable
|
|
Our Price: $7.76
|
|
|
|
Our Price: $9.00
|
|
|
|
Our Price: $9.35
|
|
|
|
Our Price: $9.41
|
|
|
|
|
|
|
2 1/2" Pressed Steel Bulldog Hinge - designed for use on industrial chain link gates. This galvanized hinge fits a 2 1/2" gate post and a 1 5/8" or 2" gate upright (adjustable collar). A Bulldog Hinge enables the gate to swing 90 degrees either direction or 180 degrees through the use of an adapter.
Industrial Bulldog Hinges are sold individually, not in pairs.
|
3" Pressed Steel Butt Hinge - designed for use on industrial chain link gates. This galvanized hinge fits a 3" gate post and a 1 5/8" or 2" gate upright. The Butt Hinge enables a gate to swing 90 degrees either direction or 180 degrees with an adapter.
Industrial Butt Hinges are sold individually, not in pairs.
|
3" Pressed Steel Bulldog Hinge - designed for use on industrial chain link gates. This galvanized hinge fits a 3" gate post and a 1 5/8" or 2" gate upright (adjustable collar). A Bulldog Hinge enables the gate to swing 90 degrees either direction or 180 degrees through the use of an adapter.
Industrial Bulldog Hinges are sold individually, not in pairs.
|
The 2 1/2" Steel Arm Hinge is used with commercial chain link gates with 1 5/8" or 2" uprights (outside diameter) and a 2 1/2" hinge post. This malleable steel hinge is galvanized and comes with U-bolts for easy gate adjustment.
|
|
|
|
2 1/2" Malleable Steel Butt Hinge
|
|
2 1/2 Arm Hinge - Pressed Steel
|
|
3" Malleable Steel Butt Hinge
|
|
3" Arm Hinge - Pressed Steel
|
|
Our Price: $9.74
|
|
|
|
Our Price: $9.95
|
|
|
|
Our Price: $10.11
|
|
|
|
Our Price: $10.15
|
|
|
|
|
|
|
2 1/2" Malleable Butt Hinge - designed for industrial chain link gates. This galvanized steel hinge fits a 2 1/2" gate post. The adjustable collar enables it to fit 1 5/8" or 2" gate frames. The Butt Hinge enables a gate to swing 90 degrees either direction or 180 degrees with an adapter.
Industrial Butt Hinges are sold individually, not in pairs.
|
The 2 1/2" Steel Arm Hinge is used with commercial chain link gates with 1 5/8" or 2" uprights (outside diameter) and a 2 1/2" hinge post. This pressed steel hinge is galvanized for rust protection, and comes with U-bolts for easy gate adjustment.
|
3" Malleable Butt Hinge - designed for industrial chain link gates. This galvanized steel hinge fits a 3" gate post. The adjustable collar enables it to fit 1 5/8" or 2" gate frames. The Butt Hinge enables a gate to swing 90 degrees either direction or 180 degrees with an adapter.
Industrial Butt Hinges are sold individually, not in pairs.
|
The 3" Steel Arm Hinge is used with commercial chain link gates with 1 5/8" or 2" uprights (outside diameter) and a 3" hinge post. This pressed steel hinge is galvanized for rust protection, and comes with U-bolts for easy gate adjustment.
|
|
|
|
4" Bulldog Hinge
|
|
4" Arm Hinge - Pressed Steel
|
|
4" Pressed Steel Butt Hinge
|
|
3" Arm Hinge - Malleable
|
|
Our Price: $10.43
|
|
|
|
Our Price: $10.58
|
|
|
|
Our Price: $11.12
|
|
|
|
Our Price: $12.35
|
|
|
|
|
|
|
4" Pressed Steel Bulldog Hinge - designed for use on industrial chain link gates. This galvanized hinge fits a 4" gate post and a 1 5/8" or 2" gate upright (adjustable collar). A Bulldog Hinge enables the gate to swing 90 degrees either direction or 180 degrees through the use of an adapter.
Industrial Bulldog Hinges are sold individually, not in pairs.
|
The 4" Steel Arm Hinge is used with commercial chain link gates with 1 5/8" or 2" uprights (outside diameter) and a 4" hinge post. This pressed steel hinge is galvanized for rust protection, and comes with U-bolts for easy gate adjustment.
|
4" Pressed Steel Butt Hinge - designed for use on industrial chain link gates. This galvanized hinge fits a 4" gate post and a 1 5/8" - 2" gate upright. The Butt Hinge enables a gate to swing 90 degrees either direction or 180 degrees with an adapter.
Industrial Butt Hinges are sold individually, not in pairs.
|
The 3" Steel Arm Hinge is used with commercial chain link gates with 1 5/8" or 2" uprights (outside diameter) and a 3" hinge post. This malleable steel hinge is galvanized and comes with U-bolts for easy gate adjustment.
|
|
|
|
2" 180 Degree Hinge Adapter - Full Swing
|
|
4" Malleable Steel Butt Hinge
|
|
4" Arm Hinge - Malleable
|
|
6 5/8" Pressed Steel Butt Hinge
|
|
Our Price: $12.39
|
|
|
|
Our Price: $13.16
|
|
|
|
Our Price: $15.04
|
|
|
|
Our Price: $16.03
|
|
|
|
|
|
|
|
Galvanized 180-Degree Gate Adapter fits a 1 5/8" or 2" gate.and provides the ability to swing up to 180-degrees. Galvanized for durability. Includes U-bolts.
|
4" Malleable Butt Hinge - designed for industrial chain link gates. This galvanized steel hinge fits a 4" gate post. The adjustable collar enables it to fit 1 5/8" or 2" gate frames. The Butt Hinge enables a gate to swing 90 degrees either direction or 180 degrees with an adapter.
Industrial Butt Hinges are sold individually, not in pairs.
|
The 4" Steel Arm Hinge is used with commercial chain link gates with 1 5/8" or 2" uprights (outside diameter) and a 4" hinge post. This malleable steel hinge is galvanized and comes with U-bolts for easy gate adjustment.
|
6 5/8" Pressed Steel Butt Hinge - designed for use on industrial chain link gates. This galvanized hinge fits a 6 5/8" gate post and a 1 5/8" or 2" gate upright. The Butt Hinge enables a gate to swing 90 degrees either direction or 180 degrees with an adapter.
Industrial Butt Hinges are sold individually, not in pairs.
|
|
|
|
2" x 1 3/8" Spring Loaded Gate Closer
|
|
6 5/8" Bulldog Hinge
|
|
3 1/2" Malleable Steel Butt Hinge
|
|
2 1/2" x 1 3/8" Spring Loaded Gate Closer
|
|
Our Price: $16.38
|
|
|
|
Our Price: $16.65
|
|
|
|
Our Price: $17.46
|
|
|
|
Our Price: $17.60
|
|
|
|
|
|
|
The Spring Loaded, Gate Closer for 1 3/8" Gate Frame and 2" Post enables makes your walk gate close automatically behind you.
This device can be paired with a self-latching gate latch for additional security.
Features a durable, rust proof, aluminum construction for low maintenance.
|
6 5/8" Pressed Steel Bulldog Hinge - designed for use on industrial chain link gates. This galvanized hinge fits a 6 5/8" gate post and a 1 5/8" or 2" gate upright (adjustable collar). A Bulldog Hinge enables the gate to swing 90 degrees either direction or 180 degrees through the use of an adapter.
Industrial Bulldog Hinges are sold individually, not in pairs.
|
3 1/2" Malleable Butt Hinge - designed for industrial chain link gates. This galvanized steel hinge fits a 3 1/2" gate post. The adjustable collar enables it to fit 1 5/8" or 2" gate frames. The Butt Hinge enables a gate to swing 90 degrees either direction or 180 degrees with an adapter.
Industrial Butt Hinges are sold individually, not in pairs.
|
The Spring Loaded, Gate Closer for 1 3/8" Gate Frame and 2 1/2" Post enables makes your walk gate close automatically behind you.
This device can be paired with a self-latching gate latch for additional security.
Features a durable, rust proof, aluminum construction for low maintenance.
|
|
|
|
6 5/8 Arm Hinge Pressed Steel
|
|
3 1/2" Arm Hinge - Pressed Steel
|
|
2" x 1 3/8" Gravity Closer
|
|
2 1/2" x 1 3/8" Closer Gravity
|
|
Our Price: $18.93
|
|
|
|
Our Price: $20.23
|
|
|
|
Our Price: $20.54
|
|
|
|
Our Price: $23.04
|
|
|
|
|
|
|
|
The 6 5/8" Steel Arm Hinge is used with commercial chain link gates with 1 5/8" or 2" uprights (outside diameter) and a 6 5/8" hinge post. This pressed steel hinge is galvanized for rust protection, and comes with U-bolts for easy gate adjustment.
|
The 3 1/2" Steel Arm Hinge is used with commercial chain link gates with 1 5/8" or 2" uprights (outside diameter) and a 3 1/2" hinge post. This pressed steel hinge is galvanized for rust protection, and comes with U-bolts for easy gate adjustment.
|
A Gravity Gate Closer is a self-closing hinge that uses your gate's own weight to close it automatically…no springs necessary. On residential gates, this closer makes a great safety gate pairing with a self-latching gate latch.
This Gravity Gate Closer is designed to fit a 1 3/8 Framework and 2" Gate Post.
|
A Gravity Gate Closer is a self-closing hinge that uses your gate's own weight to close it automatically…no springs necessary. On residential gates, this closer makes a great safety gate pairing with a self-latching gate latch.
This Gravity Gate Closer is designed to fit a 1 3/8 Framework and 2 1/2" Gate Post.
|
|
|
|
6 5/8" Malleable Steel Butt Hinge
|
|
3" x 1 3/8" Closer Gravity
|
|
2 1/2" x 1 5/8" Closer Gravity
|
|
3" x 1 5/8" Closer Gravity
|
|
Our Price: $23.14
|
|
|
|
Our Price: $23.91
|
|
|
|
Our Price: $25.16
|
|
|
|
Our Price: $26.03
|
|
|
|
|
|
|
6 5/8" Malleable Butt Hinge - designed for industrial chain link gates. This galvanized steel hinge fits a 6 5/8" gate post. The adjustable collar enables it to fit 1 5/8" or 2" gate frames. The Butt Hinge enables a gate to swing 90 degrees either direction or 180 degrees with an adapter.
Industrial Butt Hinges are sold individually, not in pairs.
|
A Gravity Gate Closer is a self-closing hinge that uses your gate's own weight to close it automatically…no springs necessary. On residential gates, this closer makes a great safety gate pairing with a self-latching gate latch.
This Gravity Gate Closer is designed to fit a 1 3/8 Framework and 3" Gate Post.
|
A Gravity Gate Closer is a self-closing hinge that uses your gate's own weight to close it automatically…no springs necessary. On residential gates, this closer makes a great safety gate pairing with a self-latching gate latch.
This Gravity Gate Closer is designed to fit a 1 5/8 Framework and 2 1/2" Gate Post.
|
A Gravity Gate Closer is a self-closing hinge that uses your gate's own weight to close it automatically…no springs necessary. On residential gates, this closer makes a great safety gate pairing with a self-latching gate latch.
This Gravity Gate Closer is designed to fit a 1 5/8 Framework and 3" Gate Post.
|
|
|
|
4 1/2" Bulldog Hinge
|
|
4 1/2" Arm Hinge - Pressed Steel
|
|
6 5/8" Arm Hinge - Malleable
|
|
3 1/2" Bulldog Hinge
|
|
Our Price: $26.84
|
|
|
|
Our Price: $28.59
|
|
|
|
Our Price: $31.72
|
|
|
|
Our Price: $32.84
|
|
|
|
|
|
|
4 1/2" Pressed Steel Bulldog Hinge - designed for use on industrial chain link gates. This galvanized hinge fits a 4 1/2" gate post and a 1 5/8" or 2" gate upright (adjustable collar). A Bulldog Hinge enables the gate to swing 90 degrees either direction or 180 degrees through the use of an adapter.
Industrial Bulldog Hinges are sold individually, not in pairs.
|
The 4 1/2" Steel Arm Hinge is used with commercial chain link gates with 1 5/8" or 2" uprights (outside diameter) and a 4 1/2" hinge post. This pressed steel hinge is galvanized for rust protection, and comes with U-bolts for easy gate adjustment.
|
The 6 5/8" Steel Arm Hinge is used with commercial chain link gates with 1 5/8" or 2" uprights (outside diameter) and a 6 5/8" hinge post. This malleable steel hinge is galvanized and comes with U-bolts for easy gate adjustment.
|
3 1/2" Pressed Steel Bulldog Hinge - designed for use on industrial chain link gates. This galvanized hinge fits a 3 1/2" gate post and a 1 5/8" or 2" gate upright (adjustable collar). A Bulldog Hinge enables the gate to swing 90 degrees either direction or 180 degrees through the use of an adapter.
Industrial Bulldog Hinges are sold individually, not in pairs.
|
|
|
