Chain Link Fork Clamps, Galvanized, Pressed Steel, Padlockable - Multiple Sizes

Product Description

Chain Link Fork Clamp — Galvanized, Pressed Steel, Padlockable (1-3/8", 1-5/8", 2" Gate Frames)

• Build a Reliable Fork Latch — Pair with a chain link gate fork to create a secure, padlockable latch
• Professional Grade — Heavy pressed steel with a galvanized finish for long-term outdoor performance
• Fast, Field-Friendly Install — Two 5/16" x 1-1/4" carriage bolts (not included) clamp the fork and bracket around the gate upright
• Sized for Common Frames — Fits 1-3/8", 1-5/8", or 2" (1-7/8" actual O.D.) round gate uprights
• Clean Operation — Holds the fork square to the latch post for smooth opening and closing

This professional grade galvanized fork clamp is one half of a classic chain link fork latch. Clamp it around your round gate upright and sandwich the fork between the two halves to create a durable, padlock-ready closure for walk gates and light commercial gates. The pressed-steel body and hot-dip galvanized finish stand up to weather and daily use, while the simple two-bolt design makes installation quick on new builds and retrofits.

Why Choose This

• Contractor-trusted hardware that delivers dependable latching day after day
• Simple, repeatable install — align, bolt, and tighten with standard tools
• Corrosion resistance from a rugged galvanized finish
• Padlock-capable when used with a compatible fork (padlock not included)

Specifications

Installation

Place each clamp half around the gate upright at your latch height. Position the fork (sold separately) between the halves so the fork’s bolt hole aligns with the outer clamp hole. Insert a 5/16" x 1-1/4" carriage bolt through the first clamp half, the fork, and the second clamp half; add the nut. Insert the second carriage bolt through the inner holes and tighten both nuts until the assembly is snug and the fork moves freely for smooth latching. Tip: If your carriage bolts are galvanized and you prefer a darker look, you can spray-paint them to blend with surrounding hardware.

Buying Guide

• Match the clamp to your gate upright: Choose 1-3/8", 1-5/8", or 2" (1-7/8" O.D.) to fit your gate frame tube.
• Match the fork to your latch post: Select a fork sized to the latch post O.D. so the fork seats squarely in the clamp when closed.
• Hardware: Two 5/16" x 1-1/4" carriage bolts/nuts are required (not included).
• Security: For a lockable setup, use a compatible padlock through the fork and clamp holes (padlock not included).

Frequently Asked Questions

Is this clamp padlockable?

Yes. When used with a compatible fork, you can insert a padlock through the aligned fork and clamp holes (padlock not included).

Does this include the fork and bolts?

No. The fork and 5/16" x 1-1/4" carriage bolts/nuts are sold separately.

Which size should I choose?

Pick the clamp size that matches your round gate upright: 1-3/8", 1-5/8", or 2" (1-7/8" actual O.D.).

Will this work on a square frame?

No. Fork clamps are designed for round chain link gate uprights.

Can I retrofit this on an existing gate?

Yes. The two-bolt clamp design makes it a straightforward upgrade on most round-tube chain link gates.