Color Pressed Steel Chain Link Loop Cap, Multiple Sizes & Colors

Product Description

Color Pressed-Steel Chain Link Loop Cap for Top Rail — Multiple Sizes (Black, Green, Brown)

• Heavy-Duty Line-Post Cap — Guides top rail or tension wire straight across line posts
• Color-Coated Finish — Pressed steel with durable Black, Green, or Brown coating to match color systems
• Secure, Low-Profile Fit — Press/tension fit over the post; keeps rail aligned at a uniform height
• Sized for Common Framework — Options for 1-5/8″, 1-7/8″, 2-3/8″, and 2-7/8″ posts with 1-3/8″ or 1-5/8″ rail
• Commercial-Ready — Heavier-gauge steel stands up to high-traffic and long runs
• Barbed Wire Note — Use a line post barb arm with integrated loop wherever barbed wire is installed

Finish your color chain link line posts with pressed-steel loop caps (eye-tops) that carry the top rail or tension wire in one continuous run to the nearest terminal. The rugged, color-coated steel body resists impact and weather while blending with Black, Green, or Brown framework for a clean, professional look—without additional fasteners or clamps.

Why Choose This

• Rugged construction — Pressed steel handles bumps and high-use environments
• Consistent alignment — Keeps the rail straight and at a uniform elevation
• Simple install — Press-fit over the post; no screws or bands required
• Color matched — Coordinates with color framework, ties, and fittings

Specifications

Installation

Seat a loop cap on each line post with the loop oriented perpendicular to the fence line. Press down until fully seated (a snug fit is normal). Feed the color top rail or tension wire through the loop and continue to the terminal post for attachment with a rail end and brace band. For any runs with barbed wire, use a color line post barb arm with an integrated loop instead of a standard loop cap.

Buying Guide

• Pick by post and rail: Match the actual post O.D. and the top rail O.D. (1-3/8″ or 1-5/8″) to the size options above.
• Pressed steel vs. aluminum: Pressed steel is tougher for high-traffic/long runs; aluminum won’t rust and is popular for residential/coastal.
• Color matching: Choose Black, Green, or Brown to coordinate with your framework, wire, fittings, and ties.
• Where they go: Use loop caps on line posts; terminate rails at ends/corners with rail ends + brace bands.
• Barbed wire lines: Replace loop caps with color barb arms (with loops) wherever barbed wire is installed.

Frequently Asked Questions

Do I need screws or bands to hold these on?

No. They’re tension-set over the post—no additional hardware is required.

Will the color match my fence?

These caps use standard Black, Green, and Brown finishes for color chain link systems. Shade may vary slightly between manufacturers—ordering within the same system provides the best match.

Which size should I choose?

Match the actual post O.D. and the top rail O.D. you’re running (see the Spec table for pairings).

Are pressed-steel caps better for commercial jobs?

They’re preferred for durability and impact resistance; aluminum caps are lighter and rust-proof for residential lines.

Can I use these where barbed wire is present?

Use a color line post barb arm with an integrated loop wherever barbed wire is installed.

Comparison

Not sure which size and color match your framework? Contact us and we’ll help you choose the right combination.