Product Description
Laredo Sunset® Post-to-Beam Brackets by OZCO® OWT — 4″, 6″ & 8″ (2-Pack)
- Built-in “Ledge” Support — Two-piece design lets you rest the beam on the bracket while fastening for safer, faster installs
- Adjusts to Beam Thickness — Interlocking top cover fits standard 2x lumber, ~1.45″–2.00″ thick (smooth or rough-sawn)
- Outdoor-Ready — Heavy 3/16″ pre-galvanized steel with black exterior powder coat; approved for use with ACQ-treated lumber
- Clean, Cohesive Look — Decorative Hex Cap Nuts finish the connection in the Laredo Sunset style
- Versatile Applications — Pergolas, pavilions, porch covers, and other overhead post-to-beam joints
OZCO Post to Beam Connectors are another Building Innovation from OZCO Building Products. With their revolutionary 2-piece design, the Post to Beam connectors let you install them on your posts and then rest your beam on the built-in ledge before positioning it. This not only saves time and labor, but it also lets you get a perfect measurement every time. The 2-piece design also makes the connector adjustable so that you can use any standard 2" wood beam, from an actual dimension of 1.45" up to 2".
Unlike other hardware, OWT Hardware becomes an essential part of the look of your project that you'll want to showcase rather than hide. The Laredo Sunset design brings a southwestern flair to your project with its strong, beautiful curves and clean lines.
Each OWT Post to Beam Bracket comes with:
- 2 - Post Ledge Bases
- 2 - Top Cover Plates
- 8 - Hex Cap Nuts
- 4 - 1-3/4" OWT Timber Screws
- 4 - 3-3/4" OWT Timber Screws
* Larger and load-bearing projects might require Timber bolts to be used instead of, or together with, the Timber Screws. The Timber Bolts are NOT included, size and application will determine the appropriate size of the fastener for this connection. Timber Bolts are recommended to fasten to the beam in larger structures with heavier load – screws are NOT recommended to secure top hole placement with larger load connections.
Why Choose This
- Faster, safer handling — Set the beam on the ledge, align, and fasten with fewer hands
- Reliable connection — 3/16″ steel and through-fastening deliver strength you can count on
- Style that matches — Coordinates with the full Laredo Sunset OWT line for a unified build
Specifications
| Model / Item # | 4″ — 56675 (P2B-LS-4) | 6″ — 56635 (P2B-LS-6) | 8″ — 56610 (P2B-LS-8) |
| Typical Post Size | 4×4 posts | 6×6 posts (or larger) | 8×8 posts (or larger) |
| Beam Thickness Range | ~1.45″–2.00″ (standard 2x lumber; top cover plate adjusts) | ||
| Material / Finish | 3/16″ pre-galvanized steel with black powder coat; ACQ-approved | ||
| Included Hardware (per 2-Pack) | (2) Post Ledge Bases; (2) Top Covers; (8) Hex Cap Nuts; (4) OWT Timber Screws 1-3/4″; (4) OWT Timber Screws 3-3/4″ | (2) Post Ledge Bases; (2) Top Covers; (8) Hex Cap Nuts; (4) OWT Timber Screws 2-3/4″; (4) OWT Timber Screws 3-3/4″ | (2) Post Ledge Bases; (2) Top Covers; (8) Hex Cap Nuts; (4) OWT Timber Screws 2-3/4″; (4) OWT Timber Screws 3-3/4″ |
| Driver Size (Hex) | 3/8″ (for provided screws and Hex Cap Nuts) | ||
| Approx. Dimensions | 8.88″ × 6″ × 2.38″ (L×W×H) | 8.75″ × 6″ × 2.25″ (L×W×H) | 8.75″ × 6″ × 2.13″ (L×W×H) |
| Approx. Weight | 3.5 lb per kit | 7.0 lb per kit | 7.5 lb per kit |
| Pack Quantity | 2 brackets per pack (two complete post-to-beam assemblies) | ||
| Typical Usage | Pergolas, pavilions, porch covers, and decorative outdoor structures | ||
Installation
Dry-fit the bracket at your layout line, mount the ledge base to the post, and rest the beam on the ledge. Install the interlocking top cover, then drive the included OWT Timber Screws. Use the 3/8″ hex driver for the screws and Hex Cap Nuts. Always fasten into sound lumber, keep posts plumb, and follow local code and engineering requirements—especially for snow/wind loads and span.
Resources: Laredo Sunset Post-to-Beam Installation (PDF) | Manufacturer’s Warranty
Buying Guide
- Pick your size: Match the bracket to your post width (4×4, 6×6, or 8×8). The top cover handles most 2x beam thicknesses (~1.45″–2.00″).
- Finish the look: Add extra OWT Hex Cap Nuts where hardware is visible.
- Stock your fasteners: Keep OWT Timber Screws on hand for additional connections; match lengths to your members.
- Coordinate components: For rafters/slats in the same style, pair with Laredo Sunset Rafter Clips.
Frequently Asked Questions
- What beam thicknesses will these fit?
- The adjustable top cover fits typical 2x lumber, roughly 1.45″ to 2.00″ thick (smooth or rough-sawn).
- Are these compatible with pressure-treated lumber?
- Yes. The pre-galvanized steel and powder coat are approved for use with ACQ-treated materials.
- What driver size do I need?
- A 3/8″ hex driver is used for the provided screws and Hex Cap Nuts.
- How many assemblies come in a pack?
- Each package contains two complete post-to-beam assemblies (two brackets).
Comparison
- Laredo Sunset Post-to-Beam (this item): Signature LS styling with ledge support and adjustable top cover for 2x beams.
- Ironwood Post-to-Beam: Same function and hardware with the Ironwood aesthetic to match other IW components.
- Flush / Bolt-Inline / Bolt-Offset Variants: Alternate geometries for tight reveals or through-bolt layouts; choose based on look and load path.
Need help kitting a pergola or pavilion in the Laredo Sunset style? Contact us and we’ll help you match brackets, fasteners, and accents for a clean, code-conscious build.
