Product Description
PulJak® Fence Puller Repair Kit — 2 Springs, Trigger Cam, Small Cam
- Everything to refresh the workhead — Includes 2 replacement springs, 1 trigger cam, and 1 small cam.
- Restore smooth ratcheting — Replaces the wear parts that most affect pull strength, indexing, and release.
- Installer-friendly — Straightforward swap with basic hand tools; no full tool replacement needed.
- Field-proven parts — Genuine-style components for standard PulJak® workheads.
Bring a tired PulJak® back to life with a quick workhead refresh. This repair kit targets the cams and springs that control ratcheting and release—so your puller pumps tight again and lets off cleanly. If your crew needs a full puller, see our PulJak® Type A Puller. For questions on fitment or rebuild steps, contact us.
What’s Included
| Springs | 2 replacement workhead springs (left & right) |
| Trigger Cam | 1 replacement trigger cam (release cam) |
| Small Cam | 1 replacement small cam (ratchet/pawl cam) |
Compatibility
- Designed for standard PulJak® workheads (Type A/B). If your puller has non-standard or heavily modified internals, contact us before ordering.
- Post size doesn’t matter — Parts fit the workhead; they’re not sized to post OD.
Quick Rebuild Steps
- Disassemble — Depress the trigger cam, remove the rod/handle, and slide the workhead off.
- Replace parts — Swap in the new trigger cam, small cam, and springs. (Spring-compressing pliers make the job easier.)
- Reassemble & test — Ensure both cams move smoothly against spring tension and the trigger releases cleanly.
Buying Guide
- Choose this kit for routine wear — Slipping, weak indexing, or poor release are classic signs the cams/springs need replacement.
- Consider a full rebuild — If the body casting, rod, or handle is bent or cracked, a full parts set or replacement puller is more economical.
- Maintenance tip — Keep the workhead clean/dry. Do not oil the cams or springs; lubricants can cause slippage.
Frequently Asked Questions
- What parts does this kit replace?
- Two workhead springs, one trigger cam (release), and one small cam (ratchet/pawl).
- Will this fit my PulJak® Type A or Type B?
- Yes—these are the standard wear parts for PulJak® workheads used with Type A or Type B pullers.
- Do I need special tools?
- Basic hand tools work. Spring-compressing pliers make installing the new springs faster and safer.
- Should I lubricate the cams?
- No—avoid oil on cams/springs; it can cause slippage. Keep parts clean and dry instead.
Comparison
- This Repair Kit — Springs + trigger cam + small cam; restores ratchet & release performance.
- Replacement Workhead / Full Parts — Choose if casting/rod/handle is damaged or excessively worn.
- Complete Puller — If your tool is missing major parts or you need a second unit for the crew.
