Product Description
Laredo Sunset® Post Base Twin Rail Saddles by OZCO® OWT — Connect Two 2×4 Rails to 4×4 or 6×6 Posts
- Two Rails, One Base — Integrated post base captures two nominal 2×4 rails (1-1/2″ × 3-1/2″) at the proper height
- Inline or 90° Corners — Twin saddles support straight-through runs or true 90° corner posts with the same hardware
- Outdoor-Ready Steel — 3/16″ hot-dip galvanized plate with durable black powder coat; ACQ-approved
- Contractor-friendly Fastening — Hex Cap Nuts use a 3/8″ driver; rail screws use a T25 Torx bit for quick installs
- Cohesive Look — Matches the Laredo Sunset aesthetic across posts, beams, and accents
Connect your 2 x 4 wood railing rails with style and durability using the OZCO Post Base Twin Rail Saddle. This kit combines a heavy-duty post base with two rail saddles to provide you with a great looking installation option for your wood posts & rails. The Post Bases are designed to fit either 4 x 4 or 6 x 6 wood posts, and they are adjustable to allow for dimensional lumber tolerances. Two of the post base plates have integrated rail saddles that can be used to create an inline rail or a 90-degree corner rail depending on where you place them. OZCO Rail Saddles are engineered to position the railing at 3.4" from the surface, which is line with IRC building codes.
These Laredo Sunset Style Post Base Kits w/ Twin Rail Saddles offer a classic southwestern look with their rounded tops and heavy-duty iron look.
Made from hot-dip galvanized steel with an exterior grade powder coat that will keep them looking great for many years. OWT Hardware is built outdoor tough, but it can also be used indoors for any project.
Each Post Base with Rail Saddles Kit comes with:
- 1 - Base Plate
- 2 - Rail Saddle Plates
- 2 - Standard Plates
- 6 - Hex Cap Nuts
- 6 - 1-3/4" OWT Timber Screws
- 12 - #12 x 1-1/4" Torx HD
Post Base Kits do not come with surface attachment hardware. Choose the correct hardware depending on the surface material that you are attaching to.
Why Choose This
- Faster layout — Pre-set rail height and twin saddles reduce measuring and shimming
- Reliable connection — Through-fastened steel brackets provide strength and repeatability
- Style match — Coordinates with Laredo Sunset posts, post-to-beam brackets, and accents
Specifications
| Model / Item # | 4×4-TRS-LS — 56630 | 6×6-TRS-LS — 56672 |
| Typical Post Size | 4×4 wood post | 6×6 wood post |
| Rail Compatibility | Two nominal 2×4 rails (approx. 1-1/2″ × 3-1/2″), inline or 90° corner | |
| Material / Finish | 3/16″ hot-dip galvanized steel with black powder coat; ACQ-treated lumber compatible | |
| Driver Sizes | 3/8″ hex (Hex Cap Nuts & OWT Timber Screws); T25 Torx (#12 rail screws) | |
| Included Hardware | (1) Base Plate; (2) Rail Saddle Plates; (2) Rail Saddles; (2) Standard Plates; (6) Hex Cap Nuts; (6) OWT Timber Screws 1-3/4″; (12) #12 × 1-1/4″ Torx HD (T25) | (1) Base Plate; (2) Rail Saddle Plates; (2) Rail Saddles; (2) Standard Plates; (8) Hex Cap Nuts; (8) OWT Timber Screws 2-3/4″; (12) #12 × 1-1/4″ Torx HD (T25) |
| Approx. Dimensions (packaged) | 8.5″ × 7.25″ × 4.75″ | 8.88″ × 8.25″ × 4.75″ |
| Approx. Weight (kit) | ~5.4 lb | ~9.5 lb |
| Typical Usage | Deck and porch guardrails, decorative rail runs, and similar post-to-rail connections | |
Installation
Set and plumb the post, anchor the post base to your surface per plan, then install the twin rail saddles (inline or at 90°). Seat the 2×4 rails and drive the included fasteners — use a 3/8″ hex driver for Hex Cap Nuts/Timber Screws and a T25 bit for the #12 rail screws. Always fasten into sound lumber and follow local code for guard height, spacing, and loads.
Resource: Manufacturer’s Warranty
Buying Guide
- Choose your post size: Order 56630 for 4×4 posts or 56672 for 6×6 posts.
- Match your style & hardware: For top-rail connections away from bases, pair with 2×4 Top Rail Saddles. For overhead members, see Laredo Sunset Post-to-Beam Brackets. Keep extra OWT 1/4″ Timber Screws on hand for adjacent connections.
Frequently Asked Questions
- Can this form both straight runs and corners?
- Yes. The twin rail saddles support in-line rail connections or a 90° corner on the same post.
- What rail size does it accept?
- Two nominal 2×4 rails (approximately 1-1/2″ × 3-1/2″) per post base assembly.
- Which driver bits do I need?
- A 3/8″ hex driver for the Hex Cap Nuts and Timber Screws, and a T25 Torx bit for the #12 rail screws.
- Is it compatible with pressure-treated lumber?
- Yes. The hot-dip galvanized, powder-coated steel is suitable for use with ACQ-treated materials.
Comparison
- Post Base Twin Rail (this item): Anchors post and captures two 2×4 rails for inline or corner layouts.
- Post Base Single Rail: Same concept for one 2×4 rail — ideal for ends and transitions.
- 2×4 Top Rail Saddle: Attaches a single top rail to a post where a base plate isn’t required at that location.
Planning a full rail package and want everything to match? Contact us and we’ll help you kit posts, saddles, screws, and accents for a clean build.
