Product Description
OZ-Post® HSP-T6 Black Hammer-Spacer — Centers OH-01 Driver in T6-700 & T6-850 Wood Post Anchors
- Keep the Driver Centered — Slides over the OH-01 Oz-Hammer to keep impacts centered inside the T6-700 / T6-850 5-1/2″ square sleeves
- Smoother, Straighter Installs — Reduces chatter and “wander” when jackhammer-driving large 6×6 anchors
- Color-Coded & Durable — Steel, powder-coated Black spacer built for repeated jobsite use
- Purpose-Built Fit — Bridges the gap between the 2″-dia. OH-01 driver and the 5-1/2″ I.D. T6 sleeves
The HSP-T6 Hammer-Spacer centers OZCO’s OH-01 jackhammer driver while you install T6-700 and T6-850 (5-1/2″ square) OZ-Post® anchors. By keeping the driver aligned inside the sleeve, blows land squarely for a cleaner drive, helping maintain plumb and protecting the sleeve from edge strikes—especially useful on long runs or harder soils. Only one spacer and one driver are needed for the T6 family.
Why Choose This
- Consistency at scale — Uniform, centered impacts across multiple posts
- Better control — Helps prevent bounce and mis-hits that can tilt anchors
- Jobsite tough — Steel construction with protective powder-coat finish
Specifications
| Model / Item # | HSP-T6 Hammer-Spacer — OZ-Tools Item 40540 |
| Fits Anchor | T6-700 & T6-850 (5-1/2″ I.D. sleeves for 6×6 nominal posts) |
| Used With Driver | OH-01 Oz-Hammer jackhammer driver bit (2″ diameter) |
| Spacer Color | Black (color-coded for T6 series) |
| Material / Finish | Steel, powder-coated |
| Approx. Weight | 3.5 lb |
| Approx. Dimensions | 3.63″ × 5.38″ × 5.38″ |
| Typical Usage | Centering the OH-01 driver when jackhammer-driving T6-series anchors |
Installation
Attach the OH-01 driver to your jackhammer. Slide the HSP-T6 spacer onto the OH-01. Position the driver/spacer stack inside the T6 sleeve and drive the anchor to grade, checking plumb as you go. The spacer keeps the driver centered to reduce chatter and sleeve damage. For T6-700, install over OZ-Deck® plates per the deck-foundation instructions; for T6-850, follow the standard T-series anchor workflow.
Resources: Manufacturer’s Warranty
Buying Guide
- Anchor match: Use HSP-T6 with T6-850 (6×6) or T6-700 (6×6 for OZ-Deck).
- Driver kits: For production installs, the JDK-10 Jackhammer Driver Kit includes the OH-01 driver; add the spacer sized for your anchor family.
Frequently Asked Questions
- Why do I need a spacer with T6 anchors?
- The T6 sleeve I.D. is larger than the OH-01 driver. The spacer fills that gap so strikes stay centered and controlled.
- Does HSP-T6 work with OH-02?
- No. OH-02 is for round (GB/HB/IS) anchors; HSP-T6 is for square T-series anchors with the OH-01 driver.
- Is the spacer reusable?
- Yes. It’s a steel, powder-coated tool intended for repeated use.
- Can I use this with the manual driver kit?
- Yes. Use the spacer specified for your anchor family when driving with manual or jackhammer kits.
Comparison
| Spacer (Color) | Fits Anchor Family | Used With Driver | Notes |
|---|---|---|---|
| HSP-T6 (Black) — this item | T6-700 / T6-850 (5-1/2″ square) | OH-01 | Centers 2″ driver in 5-1/2″ sleeve |
| HSP-T46 (Orange) | T46-850 (3-1/2″ × 5-1/2″) | OH-01 | For 4×6-size sleeves |
| HSP-I3 (Brown) | I3-850 (3″ square) | OH-01 | Centers driver in 3″ sleeve |
Need help matching spacers, drivers, and anchors for your project? Contact us and we’ll help you plan a clean, code-conscious install.
